天堂网亚洲,天天操天天搞,91视频高清,菠萝蜜视频在线观看入口,美女视频性感美女视频,95丝袜美女视频国产,超高清美女视频图片

polymer

Polymer is the product made of the polymerization reaction of monomer. Molecule should have repetitive structural units. Polymer of low molecular weight is called as low polymer (or oligomer) such as trioxymethylene. Polymer of high-molecular weight, up to thousands or even millions is called as high polymer or high-molecule compound. There are two types of high polymers including natural products and artificially synthetic product. Natural polymer such as protein is the polymers of amino acids while the starch and cellulose are the polymers (polysaccharides) of cyclic polyhydroxy, also known as biopolymers. Most of them are biodegradable and may cause short-term water BOD increment. It can also cause decomposition to generate pollutants such as ammonia, hydrogen sulfide and methane under anaerobic conditions, but will not cause long-term environmental impact. There are many types of synthetic polymers with their products having wide application. Related products include polyvinyl chloride and polystyrene plastics, resins, polyester and rubber. They are non-biodegradable substance. Long-term existence in the environment can cause a huge amount of garbage waste, among which the plasticizer will be evaporated out to pollute the environment, affecting human health at the same time. The monomers of polymer are mostly derived from petroleum, many of which are toxic and harmful substances, such as vinyl chloride which is a carcinogen. Nowadays, people are developing various polymer-containing oxide, peroxide-containing compounds and carbonyl-containing compounds. The polymer, under the sunlight photolysis, will be converted to low molecular weight organic compounds and further become harmless bio-degradable substance without contaminating the environment.

High molecular polymer is a compound consisting of one or several major structural units connecting with each other by covalent bond, also known polymers, high-molecule compound, macromolecular compounds and the like. E.g., polyethylene [-CH2-CH2-] n, Nylon 6 [-NH (CH2) 5CO-] n, whose structural units are respectively-CH2-CH2-, -NH (CH2) 5CO- with the polymerization degree being n.

Because of the high molecular weight (usually 104 to 106), it displays a number of special properties, such as relatively refractory soluble, or insoluble; swelling before being dissolved; much higher solution viscosity than a solution of equal concentration of small molecules; it has great intermolecular forces with usually exhibiting as only viscous liquid or solid form, not able to subject to gasification; the solid has a certain mechanical strength and can be subject to snagging and drawing.

The polymer is consists of a lot of macromolecular polymer chains of varying lengths, this feature is called the polydispersity of the molecular weight. We can use the distribution of the molecule weight to describe its polydispersity. The commonly referred molecular weight of the polymer is the average molecular weight of the polymer. Depending on the different statistical averaging method, there is number average molecular weight [equal to the total mass of the polymer (in g unit) divided by the total amount of the contained molecules of various molecule weights to represent Mm], weight average molecular weight (equal to the sum of the multiply of the molecules of various molecule weight and their corresponding molecular weight, expressed in Mm) and so on. Mm / Mm is called as polydispersity index, used to measure the width of the molecular weight distribution. The greater, the polydispersity index, the wider the molecular weight distribution will be and the greater the degree of dispersion.

The properties of polymers are still largely determined by the shape of the molecular chain. Depending on the shape of the molecular chain, it can be divided into linear, ball-type, network type and body-type, several structures.

The atoms of the main chain in the linear-structure polymer are often arranged in the shape of a long chain and the main chain is connected with in more or less amount of branches of varying lengths. When the polymer of such structure is heated, they tend to be melted, but also be soluble in certain organic solvents, having the probability of forming a crystal and can be oriented artificially. As some small amounts of branched-chain contained in increases the molecular spacing, the structure becomes loose, thereby reducing mechanical strength but increasing the solubility and plasticity. Common polymers belonging to this type include polyethylene, polyvinyl chloride and rubber.

The main chain of the ball-shape-structure polymer is also in long chain shape but with a large number of branches surrounding the main chain, making the molecule become globular. Its strength and elasticity is as high as that of the linear structure with no significant melting point but with excellent solubility. Phenolic resins, urea-formaldehyde resin which are the intermediate of reactions both belong to such structures.

The main chain of the high polymer of network structure is also in long chain shape, but has the bonds cross-linked, forming mesh-shape. It does not undergo melting at high temperatures but can be softened to have plasticity; it is not dissolved in an organic solvent but can swell, i.e. vulcanized rubber belongs to such type of polymer.

The high polymer of body structure has the long-chain as the main chain, being formed through the crosslink with many other molecules in three-dimensional space. However, during the process of polymerization of monomers, it can also be gradually formed through stepwise cross-linking.

The polymer of body structure is hard and brittle and can neither be melted in the high temperature nor do have plasticity. It can’t be dissolved in an organic solvent. The final products of phenol, aldehyde amine, epoxy and polyester, etc. all belong to this structure.
We can make classification for the polymer from different perspectives. According to the property and purpose, it can be divided into chemical fiber, plastics, rubber, paint and adhesives; According to the name of the synthetic reaction, it can be divided into addition polymer (such as polyethylene, polypropylene, etc.), condensation polymers (such as polyesters, polyamides etc.), ring-opening polymer (e.g., polyether, etc.); according to the source, it can be divided into natural polymers (e.g. starch, cellulose, etc.), synthetic polymers (e.g. vinyl polymers, etc.), semi-synthetic polymers (e.g. acetic acid cellulose and so on); according to the elements of the main chain, it can be divide into carbon-chain polymer (the main chain is mainly composed of carbon atoms), hetero chain polymer (the main chain contains, in addition to carbon atoms, oxygen, nitrogen, sulfur and other hetero atoms as well), element-organic polymer (main chain mainly composed of boron, silicon, aluminum, oxygen, nitrogen, sulfur and phosphorus atoms, but side-chain consists of organic groups such as methyl, ethyl, etc.); according to the application functions, it can be divided into general polymer, functional polymer and so on.

The major index of the polymers include strength, hardness, heat resistance, corrosion resistance, abrasion resistance, solvent resistance, light transmittance, and air tightness as well as electrically insulating properties. Density of the polymer is small, being much smaller than that of steel of the same volume; some of them are conductive, magnetic, and some are high temperature resistant, low temperature resistant and radiation resistant; some have excellent air tightness, transparency and so on. It has been widely used in medical, electrical conductivity, heat resistance, construction, packaging materials, plastic and some other fields.
The method of producing a polymer include bulk polymerization (including melt polymerization, referring to that monomer undergoes polymerization upon the action of light, heat and radiation without other media), solution polymerization (polymerization of monomer, initiator dissolved in an appropriate solution), emulsion (under the action of emulsifier and agitation, have the monomer be dispersed in water to form emulsion liquid to have polymerization), suspended polymerization (under the action of stirring and a dispersing agent, a monomer is dispersed into monomer droplets for being suspended in water for polymerization), etc., according to different requirements, we can apply different polymerization methods.

Click on the specific product, view the latest prices of the products, information, serving information
Structure Chemical Name CAS MF
DUOLITE C-26 ION-EXCHANGE RESIN DUOLITE C-26 ION-EXCHANGE RESIN 68441-33-8 (C10H10.C8H8.Na)x
TRIPHENYLPHOSPHINE RESIN, 1% DVB; 100-200 MESH; 1-1.5 MMOL/G TRIPHENYLPHOSPHINE RESIN, 1% DVB; 100-200 MESH; 1-1.5 MMOL/G
POLY(STYRENE-CO-METHYL METHACRYLATE) POLY(STYRENE-CO-METHYL METHACRYLATE) 25034-86-0 C13H16O2
chelate resin chelate resin
METHYL GLUCETH-20 METHYL GLUCETH-20 68239-42-9 C15H30O10
SODIUM STYRENE/ACRYLATES COPOLYMER SODIUM STYRENE/ACRYLATES COPOLYMER 9010-92-8 C12H14O2
STEARETH-10 ALLYL ETHER/ACRYLATES COPOLYMER STEARETH-10 ALLYL ETHER/ACRYLATES COPOLYMER 109292-17-3 C32H60O6
POLYGLYCERYL-10 DIISOSTEARATE POLYGLYCERYL-10 DIISOSTEARATE 63705-03-3 C39H80O7
PORAPAK P   (100-120 MESH ASTM)  FOR GC PORAPAK P (100-120 MESH ASTM) FOR GC 9052-95-3 C28H30
POLY(PROPYLENE GLYCOL) POLY(PROPYLENE GLYCOL) 25791-96-2 HO(C3H6O)nCH[CH2(OC3H6)nOH]2
Poly(ethyleneglycol) 2-[ethyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ether Poly(ethyleneglycol) 2-[ethyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ether 29117-08-6 C14H14F17NO4S
Petroleum resins Petroleum resins 64742-16-1
POLY(ETHYLENE-CO-METHACRYLIC ACID) POLY(ETHYLENE-CO-METHACRYLIC ACID) 25053-53-6 C6H10O2
STYRENE/ALLYL ALCOHOL COPOLYMER STYRENE/ALLYL ALCOHOL COPOLYMER 25119-62-4 C11H14O
BUTYLENE/ETHYLENE/STYRENE COPOLYMER BUTYLENE/ETHYLENE/STYRENE COPOLYMER 68648-89-5 C13H16
METHYL METHACRYLATE CROSSPOLYMER METHYL METHACRYLATE CROSSPOLYMER 25777-71-3 C15H22O6
Carfopol resin Carfopol resin
POLY(4-METHYL STYRENE) POLY(4-METHYL STYRENE) 24936-41-2 C9H10
Poly(β-pinene) resin Poly(β-pinene) resin
Carbomer 940 Carbomer 940 76050-42-5 (C3H4O2)n
Mercaptopolyethylene glycol monomethyl etherPEG-thiol Mercaptopolyethylene glycol monomethyl etherPEG-thiol 401916-61-8 C7H18O4S
Macroporous resin AB-8 Macroporous resin AB-8
Phenyl silicone resin interMediate Phenyl silicone resin interMediate
POLYOXYETHYLENE 25 PROPYLENE GLYCOL STEARATE POLYOXYETHYLENE 25 PROPYLENE GLYCOL STEARATE 37231-60-0 C23H46O4
Acrylic acid maleic acid copolymer Acrylic acid maleic acid copolymer 29132-58-9 C7H8O6
POLY(ISOBUTYLENE-CO-MALEIC ACID)  SODIU& POLY(ISOBUTYLENE-CO-MALEIC ACID) SODIU& 39612-00-5 C8H10O3
POLY(STYRENE-ALT-MALEIC ACID)  SODIUM POLY(STYRENE-ALT-MALEIC ACID) SODIUM 25736-61-2 C12H10O3
AMBERLITE IRA-400 AMBERLITE IRA-400 122560-63-8 C29H34ClN
Polypropylene polyol diphenylmethanediisocyanate prepolymer Polypropylene polyol diphenylmethanediisocyanate prepolymer 9048-57-1 C15H10N2O2.H.(C3H6O)n.OH
Poly(acetaldehyde-resorcinol) Poly(acetaldehyde-resorcinol) 28410-56-2 C8H10O3
Sodium salt of polynaphthalene sulphonic acid Sodium salt of polynaphthalene sulphonic acid 36290-04-7 C11H10O4S
Diclofenac resinate Diclofenac resinate
TBBPA carbonate oligomer BC58 TBBPA carbonate oligomer BC58 71342-77-3 C22H15Br7Cl2O4
Phenol, 4-(1,1-dimethylpropyl)-, polymer with sulfur chloride (S2Cl2) Phenol, 4-(1,1-dimethylpropyl)-, polymer with sulfur chloride (S2Cl2) 68555-98-6 C11H16Cl2OS2
Amberlite LA-2 Amberlite LA-2 11128-96-4
POLY(METHYL ACRYLATE) POLY(METHYL ACRYLATE) 9003-21-8 C4H6O2
TRIMETHYLOLPROPANE TRIS[POLY(PROPYLENE GLYCOL), AMINE TERMINATED] ETHER TRIMETHYLOLPROPANE TRIS[POLY(PROPYLENE GLYCOL), AMINE TERMINATED] ETHER 39423-51-3 C2H5C[CH2[OCH2CH(CH3)]nNH2]3
Massoniresil Massoniresil 96087-10-4 C20H24O8
POLY(ACRYLIC ACID), SODIUM SALT-GRAFT-POLY(ETHYLENE OXIDE) POLY(ACRYLIC ACID), SODIUM SALT-GRAFT-POLY(ETHYLENE OXIDE) 27599-56-0 C5H8O3
AMBERLITE DP-1 AMBERLITE DP-1 64333-21-7
POLYIMIDE RESIN POLYIMIDE RESIN 62929-02-6 C35H28N2O7
PPG-12/SMDI COPOLYMER PPG-12/SMDI COPOLYMER 9042-82-4 (C15H22N2O2.(C3H6O)nH2O)x
Polylactic acid Polylactic acid 26023-30-3 (C3H4O2)n
inorganic resin inorganic resin
Methyl  MQ resin Methyl MQ resin
POLY(1,4-BUTYLENE SUCCINATE), EXTENDED WITH 1,6-DIISOCYANATOHEXANE POLY(1,4-BUTYLENE SUCCINATE), EXTENDED WITH 1,6-DIISOCYANATOHEXANE 143606-53-5 C16H28N2O8
POLY(ETHYL ACRYLATE) POLY(ETHYL ACRYLATE) 9003-32-1 C5H8O2
(PHENYLSILSESQUIOXANE)-(DIMETHYLSILOXANE) COPOLYMER (PHENYLSILSESQUIOXANE)-(DIMETHYLSILOXANE) COPOLYMER 73138-88-2
POLY(STYRENE-CO-MALEIC ACID), PARTIAL CYCLOHEXYL/ISOPROPYL ESTER, CUMENE TERMINATED POLY(STYRENE-CO-MALEIC ACID), PARTIAL CYCLOHEXYL/ISOPROPYL ESTER, CUMENE TERMINATED 160611-51-8 C30H42O5
POLY(VINYL CHLORIDE-CO-VINYL ACETATE-CO-VINYL ALCOHOL) POLY(VINYL CHLORIDE-CO-VINYL ACETATE-CO-VINYL ALCOHOL) 25086-48-0 C8H13ClO3
DUOLITE A-7 ION-EXCHANGE RESIN DUOLITE A-7 ION-EXCHANGE RESIN 32610-77-8 C13H26N4O2
POLY(VINYLIDENE CHLORIDE-CO-VINYL CHLORIDE) POLY(VINYLIDENE CHLORIDE-CO-VINYL CHLORIDE) 9011-06-7 C4H5Cl3
ANTIFOAM PE-L ANTIFOAM PE-L 9003-13-8 C10H22O3
POLY(2-HYDROXYPROPYL METHACRYLATE) POLY(2-HYDROXYPROPYL METHACRYLATE) 25703-79-1 C7H12O3
POLY(ACRYLIC ACID-CO-ACRYLAMIDE), POTASSIUM SALT POLY(ACRYLIC ACID-CO-ACRYLAMIDE), POTASSIUM SALT 31212-13-2 C6H8KNO3
POLYMETHACRYLATE POLYMETHACRYLATE 25086-15-1 (C5H8O2.C4H6O2)x
40W resin 40W resin
IMINODIACETIC ACID RESIN IMINODIACETIC ACID RESIN 11139-85-8 NULL
POLY(STYRENE-CO-MALEIC ACID), PARTIAL PROPYL ESTER, CUMENE TERMINATED POLY(STYRENE-CO-MALEIC ACID), PARTIAL PROPYL ESTER, CUMENE TERMINATED 160611-48-3 C24H30O4
HMQ silicone resin HMQ silicone resin
POLY(ETHYLENE-ALT-MALEIC ANHYDRIDE) POLY(ETHYLENE-ALT-MALEIC ANHYDRIDE) 9006-26-2 C18H18O9X2
POLY(PROPYLENE GLYCOL) (300) MONOMETHACRYLATE POLY(PROPYLENE GLYCOL) (300) MONOMETHACRYLATE 39420-45-6 (C3H6O)nC4H6O2
POLY(2-ETHYLHEXYL METHACRYLATE) POLY(2-ETHYLHEXYL METHACRYLATE) 25719-51-1 C12H22O2
Polyquaternium-32 Polyquaternium-32 35429-19-7 (C9H18NO2.C3H5NO.Cl)x
Polyglycerine Polyglycerine 25618-55-7 C3H8O3
POLY(STYRENE-CO-ALPHA-METHYLSTYRENE) POLY(STYRENE-CO-ALPHA-METHYLSTYRENE) 9011-11-4 C17H18
ABS Resins ABS Resins 9003-56-9 C45H51N3X2
2-(Perfluoroalkyl)ethyl methacrylate 2-(Perfluoroalkyl)ethyl methacrylate 65530-66-7 C7H9F3O2
Nylon 12 Nylon 12 24937-16-4 (C12H23NO)n
CHELATING RESIN (IMINODIACETIC ACID) CHELATING RESIN (IMINODIACETIC ACID)
Polyquaternium-2 Polyquaternium-2 68555-36-2 C15H34Cl2N4O2
POLY(BENZYL METHACRYLATE) POLY(BENZYL METHACRYLATE) 25085-83-0 C11H12O2
Tetrakis(hydroxymethyl)phosphonium sulfate urea polymer Tetrakis(hydroxymethyl)phosphonium sulfate urea polymer 63502-25-0 C5H16N2O9PS-
HomePage | Member Companies | Advertising | Contact us | Previous WebSite | MSDS | CAS Index | CAS DataBase
Copyright © 2016 ChemicalBook All rights reserved.