| Identification | More | [Name]
Methyl-5-norbornene-2,3-dicarboxylic anhydride | [CAS]
25134-21-8 | [Synonyms]
EPON HARDENER MNA
EPON(R) MNA SUBSTITUTE
EPOXY EMBEDDING MEDIUM, HARDENER MNA
METHENDIC ANHYDRIDE
METHYL-3,6-ENDOMETHYLENETETRAHYDROPHTHALIC ANHYDRIDE
METHYL-5-NORBORNENE-2,3-DICARBOXYLIC ANHYDRIDE
METHYLBICYCLO[2.2.1]HEPT-5-ENE-2,3-DICARBOXYLIC ANHYDRIDE
METHYL NADIC ANHYDRIDE
METHYLNORBORNENE-2,3-DICARBOXYLIC ACID ANHYDRIDE
METHYLNORBORNENE-2,3-DICARBOXYLIC ANHYDRIDE
MNA
NADIC METHYL ANHYDRIDE
NADIC(R) METHYL ANHYDRIDE
NADIC(TM) METHYL ANHYDRIDE
NMA
,7-methanoisobenzofuran-1,3-dione,3a,4,7,7a-tetrahydromethyl-
3-dione,3a,4,7,7a-tetrahydromethyl-7-methanoisobenzofuran-1
4,7-Methanoisobenzofuran-1,3-dione, 3a,4,7,7a-tetrahydromethyl-, (3aalpha,4alpha,7alpha,7aalpha)-
4,7-methanoisobenzofuran-1,3-dione,3a,4,7,7a-tetrahydromethyl-,(3aalpha,4al
5-Norbornene-2,3-dicarboxylic anhydride, methyl- | [EINECS(EC#)]
246-644-8 | [Molecular Formula]
C10H10O3 | [MDL Number]
MFCD00167036 | [Molecular Weight]
178.18 | [MOL File]
25134-21-8.mol |
| Safety Data | Back Directory | [Hazard Codes ]
Xn,C | [Risk Statements ]
R22:Harmful if swallowed.
R36/37/38:Irritating to eyes, respiratory system and skin .
R42:May cause sensitization by inhalation.
R34:Causes burns. | [Safety Statements ]
S39:Wear eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . | [RIDADR ]
UN 3265 8/PG 2
| [WGK Germany ]
3
| [RTECS ]
RB9100000
| [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
III | [HS Code ]
29172000 | [Hazardous Substances Data]
25134-21-8(Hazardous Substances Data) | [Toxicity]
LD50 oral in rat: 914mg/kg |
| Hazard Information | Back Directory | [Chemical Properties]
clear light yellow oily liquid | [Uses]
Methyl-5-norbornene-2,3-dicarboxylic anhydride is used as a curing agent in epoxy resins and in the preparation of vertically aligned and penetrated carbon nanotube/polymer film. It serves as an intermediate in polyesters, alkyd resins and plasticizers. It is also used in electrical laminating and filament-winding. Further, it is used in the preparation of methyl nadimides endcapped resins based on tris(3-aminophenyl)phosphine oxide. It is utilized in the flame retarding treatment. | [General Description]
additional information see 45359 Epoxy Embedding Medium kit | [Flammability and Explosibility]
Nonflammable | [Purification Methods]
Purify the anhydride by thin layer chromatography on Al2O3 (previously boiled in EtOAc) and eluted with hexane/*C6H6 (1:2) then recrystallise it from *C6H6/hexane. The free acid has m 118.5-119.5o. [Miranov et al. Tetrahedron 19 1939 1963, Beilstein 17/11 V 199.] |
|
|