| Identification | More | [Name]
TMTD | [CAS]
137-26-8 | [Synonyms]
AATIRAM
ARASAN(R)
BIS(DIMETHYLTHIOCARBAMOYL) DISULFIDE
BIS(DIMETHYLTHIOCARBAMYL) DISULFIDE
CEKUTMTD
DELSAN(R)
DIMETHYL THIURAM DISULFIDE
MERCURAM(R)
METHYL THIURAM
METHYL TUADS
NOMERSAN(R)
POMARSOL
POMARSOL(R)
POMASOL(R)
PURALIN(R)
REZIFILM(R)
RHODIASON
SPOTRETE(R)
TERSAN(R)
TETRAMETHYLTHIURAM DISULFIDE | [EINECS(EC#)]
205-286-2 | [Molecular Formula]
C6H12N2S4 | [MDL Number]
MFCD00008325 | [Molecular Weight]
240.43 | [MOL File]
137-26-8.mol |
| Chemical Properties | Back Directory | [Appearance]
Thiram is a colorless to yellow, crystalline solid. Characteristic odor. Commercial pesticide products may be dyed blue. | [Melting point ]
156-158 °C(lit.)
| [Boiling point ]
129 °C (20 mmHg)
| [density ]
1.43 | [vapor pressure ]
8 x 10-6 mmHg at 20 °C (NIOSH, 1997) | [refractive index ]
1.5500 (estimate) | [Fp ]
89°C | [storage temp. ]
0-6°C | [solubility ]
0.0184g/l | [form ]
solid | [pka]
0.87±0.50(Predicted) | [Odor]
char. odor | [Water Solubility ]
16.5 mg/L (20 ºC) | [Merck ]
14,9371 | [BRN ]
1725821 | [Exposure limits]
NIOSH REL: TWA 0.5 mg/m3, IDLH 100 mg/m3; OSHA PEL: 0.5
mg/m3; ACGIH TLV: TWA 5 mg/m3. | [Contact allergens]
This rubber chemical, accelerator of vulcanization, represents the most commonly positive allergen contained in “thiuram mix.” The most frequent occupational categories are the metal industry, homemakers, health services and laboratories, the building industry, and shoemakers. It is also widely used as a fungicide, belonging to the dithiocarbamate group of carrots, bulbs, and woods, and as an insecticide. Thiram is the agricultural name for thiuram. | [InChIKey]
KUAZQDVKQLNFPE-UHFFFAOYSA-N | [LogP]
1.730 | [CAS DataBase Reference]
137-26-8(CAS DataBase Reference) | [IARC]
3 (Vol. Sup 7, 53) 1991 | [NIST Chemistry Reference]
Thiram(137-26-8) | [EPA Substance Registry System]
137-26-8(EPA Substance) |
| Hazard Information | Back Directory | [Definition]
ChEBI: An organic disulfide that results from the formal oxidative dimerisation of N,N-dimethyldithiocarbamic acid. It is widely used as a fungicidal seed treatment. | [General Description]
A liquid solution of a white crystalline solid. Primary hazard is to the environment. Immediate steps should be taken to limit spread to the environment. Easily penetrates the soil to contaminates groundwater and waterways. | [Reactivity Profile]
THIRAM(137-26-8) is incompatible with oxidizing materials and strong acids. Also incompatible with strong alkalis and nitrating agents . | [Air & Water Reactions]
Insoluble in water. Decomposes in acidic media to give toxic products. Decomposes to an extent on prolonged exposure to heat, air or moisture. | [Health Hazard]
Inhalation of dust may cause respiratory irritation. Liquid irritates eyes and skin and may cause allergic eczema in sensitive individuals. Ingestion causes nausea, vomiting, and diarrhea, all of which may be persistent; paralysis may develop. | [Potential Exposure]
Thiram is a dithiocarbamate. Some thiurams have been used as rubber components: thiram is used as a rubber accelerator and vulcanizer; a seed, nut, fruit, and mushroom disinfectant; a bacteriostat for edible oils and fats; and as an ingredient in suntan and antiseptic sprays and soaps. It is also used as a fungicide, rodent repellent; wood preservative; and may be used in the blending of lubricant oils. | [Fire Hazard]
Special Hazards of Combustion Products: Toxic and irritating oxides of sulfur are formed. Carbon disulfide may be formed from unburned material. | [First aid]
If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. | [Shipping]
UN2771 Thiocarbamate pesticides, solid, toxic, Hazard Class: 6.1; Labels: 6.1-Poisonous materials. | [Incompatibilities]
Dust may form explosive mixture with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine,fluorine, etc.); contact may cause fires or explosions. Keep away from strong alkaline materials, strong acids, strong bases and nitrating agents. | [Description]
Tetramethylthiuram disulfide is a rubber chemieal, an
accelerator of vulcanization. It represents the most
commonly positive allergen contained in the "thiuram
mix". The most frequent occupational categories are
the metal industry, homemakers, health services and
laboratories, building industries, and shoemakers. | [Waste Disposal]
Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Thiram can be dissolved in alcohol or other flammable solvent and burned in an incinerator with an afterburner and scrubber. | [Physical properties]
Colorless to white to cream-colored crystals. May darken on exposure to air or light. | [Hazard]
Toxic by ingestion and inhalation, irritant
to skin and eyes. Body weight and hematologic
effects. Questionable carcinogen. | [Agricultural Uses]
Fungicide, Rodenticide: Thiram is used as a fungicide to prevent crop damage
in the field and to prevent crops from deterioration
in storage or transport. Thiram is also used as a seed, nut,
fruit, and mushroom disinfectant from a variety of fungal
diseases. In addition, it is used as an animal repellent
to protect fruit trees and ornamentals from damage
by rabbits, rodents, and deer. Thiram has been used in the
treatment of human scabies, as a sun screen, and as a bactericide
applied directly to the skin or incorporated into soap. Thiram is used as a rubber accelerator and vulcanizer
and as a bacteriostat for edible oils and fats. It is also used
as a rodent repellent, wood preservative, and may be used
in the blending of lubricant oils. Registered for use in EU
countries. Registered for use in the U.S. | [Trade name]
AAPIROL®; AATACK®; AATIRAM®;
ACCELERATOR T®; ACCELERATOR THIURAM®;
ACCEL TMT®; AGROSOL POUR-ON®; ANLES®;
ARASAN®[C]; ATIRAM®; ATTACK®; AULES®;
CHIPCO THIRAM 75®; CRYLCOAT®; CUNITEX®;
CYURAM DS®; DELSAN®; EBECRYL®; EKAGOM
TB®; EVERSHIELD T SEED PROTECTORANT®;
FALITIRAM®; FERMIDE®; FERNACOL®;
FERNASAN®; FERNIDE®; FLO PRO T SEED
PROTECTANT®; FMC 2070®[C]; FORMALSOL®;
HERMAL®; HERYL®; HEXATHIR®; HY-VIC®;
KODIAK T®; KREGASAN®; LIQUID MOLY-CO-THI®;
MERCURAM®; METIURAC®; MOLY-T®; NA2771®;
NOBECUTAN®; NOMERSAN®; NORMERSAN®;
OPTIMA®; PANORAM 75®; POLYRAM
ULTRA®; POMARSOL®; POMARSOL FORTE®;
POMASOL®; PRO-GRO®; PURALIN®; RAXIL®;
REZIFILM®; ROOTONE®; ROYAL TMTD®; RTUBAYTAN-
THIRAM®; RTU FLOWABLE SOYBEAN
FUNGICIDE®; SADOPLON®; SOLUCRYL®;
SPOTRETE®; SPOTRETE-F®; SQ 1489®; SRANANSF-
X®; TERSAN 75®[C]; TERSANTETRAMETHYL
DIURANE SULFIDE®; TETRAPOM®;
TETRASIPTON®; THIANOSAN®; THILLATE®;
THIMAR®; THIMER®; THIOKNOCK®; THIOSAN®;
THIOSCABIN®; THIOTEX®; THIOTOX®; THIRAM
75®; THIRAM 80®; THIRAMAD®; THIRAM B®;
THIRAMPA®; THIRASAN®; THIULIN®; THIULIX®;
THIURAD®; THIURAMIN®; THIURAMYL®;
THYLATE®; TIRAMPA®; TITAN FL®; TRAMETAN®;
TRIDIPAM®; TRIPOMOL®; TUADS®; TUEX®;
TULISAN®; UCECOAT®; UCECRYL®; UVECRYL®;
VANCIDA TM-95®; VANCIDE TM®; VITAFLO 280®;
VITAVAX® Thiram; VITAVAX-T®; VUAGT-1-4®;
VULCAFOR TMTD®; VULKACIT MTIC®;
VULKACIT THIURAM®; VULKACIT THIURAM/C® | [Carcinogenicity]
Thiram also was not carcinogenic in rats
by gavage or in mice by single subcutaneous
injection. In skin painting studies in mice
thiram had tumor-initiating and -promoting
activity but was not a complete carcinogen.
Thiram was genotoxic to insects, plants,
fungi, and bacteria: it induced sister chromatid
exchange and unscheduled DNA synthesis in
cultured human cells. Despite established
genotoxicity in vitro, it showed no clastogenic
and/or aneugenic activity in vivo after oral
administration to mice at the maximum tolerated
dose. | [Environmental Fate]
Biological. In both soils and water, chemical and biological mediated reactions can
transform thiram to compounds containing the mercaptan group (Alexander, 1981).
Odeyemi and Alexander (1977) isolated three strains of Rhizobium sp. that degraded
thiram. One of these strains, Rhizobium meliloti, metabolized thiram to yield dimethy-
lamine (DMA) and carbon disul?de which formed spontaneously from dimethyldithiocar-
bamate (DMDT). The conversion of DMDT to DMA and carbon disul?de occurred via
enzymatic and nonenzymatic mechanisms (Odeyemi and Alexander, 1977).
When thiram (100 ppm) was inoculated with activated sludge (30 ppm) at 25°C and
pH 7.0 for two weeks, 30% degraded. Metabolites included methionine, elemental sulfur,
formaldehyde, dimethyldithiocarbamate-α-aminobutyric acid and the corresponding keto
aci
To a non-autoclaved alluvial sandy loam (pH 7.3) fortified and inoculated with the
bacterium Pseudomonas aeruginosa, 40 and 86% degradation were observed after 4 and
24 days, respectively. In autoclaved soil, thiram degradation was not affected. Degradat
Soil. Decomposes in soils to carbon disul?de and dimethylamine (Sisler and Cox,
1954; Kaars Sijpesteijn et al., 1977). When a spodosol (pH 3.8) pretreated with thiram
was incubated for 24 days at 30°C and relative humidity of 60–90%, dimethylamine formed
as the major product. Minor degradative products included nitrite ions (nitration reduction)
and dimethylnitrosamine (Ayanaba et al., 1973).
Plant. Major plant metabolites are ethylene thiourea, thiram monosul?de, ethylene
thiram disul?de and sulfur (Hartley and Kidd, 1987). | [Metabolic pathway]
Dialkyldithiocarbamates chelate copper and inhibit pyruvate dehydrogenase.
It is likely that the mode of action of chelators is principally through
their effect on lipoamide containing dehydrogenases (Corbett et al., 1984).
Thiram generates dimethyldithiocarbamic acid by being cleaved in acidic
conditions and in biological media. The acid is conjugated with glucose
and alanine in plants and with glucuronic acid in mammals. Dimethyldithiocarbamic
acid is further degraded to dimethylamine and CS2. An
extensive review of the properties of dithiocarbamate pesticides was published
by the World Health Organisation (WHO, 1988) from which much
of the following information is taken. | [Purification Methods]
Crystallise thiram (three times) from boiling CHCl3, then recrystallise it from boiling CHCl3 by adding EtOH dropwise to initiate crystallisation, and allow it to cool. Finally it is precipitated from cold CHCl3 by adding EtOH (which retains the monosulfide in solution). [Ferington & Tobolsky J Am Chem Soc 77 4510 1955, Beilstein 4 IV 242.] | [Degradation]
Thiram is decomposed in acidic media. It deteriorates on prolonged
exposure to heat, air or moisture. DT50 values are estimated as 128 days,
18 days and 9 hours at pH 4, 7 and 9, respectively (PM). The dimethyldithiocarbamate
(2) is stable in alkaline media but unstable in acidic
conditions, decomposing to dimethylamine and carbon disulfide. In
water, the dimethyldithiocarbamate can be oxidatively degraded to a
number of products. The rate of degradation depends on pH and the
type of any cations that might be present. The rate of decomposition and
production of CS2 is decreased by cations in the following order Na+ >
Zn2+> Fe3+> Cu2+. Thiram was completely degraded in sewage water in
12 days.
An ethanolic solution of unlabelled thiram (4 g l-1) was exposed to UV
light for 48 hours. The reaction tube was encircled by low pressure Hg
lamps that gave more than 85% of their total radiation at 253.7 nm. Pure
nitrogen was bubbled through the solutions. Photo-oxidation studies were
done similarly except that oxygen was bubbled through the solution.
In further experiments, irradiation was by visible light from a tungsten
lamp and again oxygen was bubbled through the solution. The outlet
gases from the UV study were condensed in a cold trap and analysed
by GC-MS. Traces of carbon disulfide and dimethylamine were
identified. The reaction mixture was also analysed by GC-MS and
three products were identified as tetramethyl hydrazine (3), N,N-dimethylthioformamide
(4) and tetramethylthiourea (5). The identity of
the latter was confirmed by IR and NMR. The reaction mixture was concentrated
and applied to TLC plates and sulfur and tetramethylthiourea
(5) were identified as the main products of photolysis. The same
products with the addition of sulfur dioxide and carbon dioxide were
produced by UV light and oxygen. Oxidation of thiram in the presence
of visible light together with Rose Bengal as a photosensitiser also gave the same products in almost identical yields. The results confirm that
C-S and S-S bond fissions are primary photochemical steps with
dithiocarbamates. | [Toxicity evaluation]
Thiram cytotoxicity appears to result from its potential to
disrupt cellular defense mechanisms against oxidative stress. In
cultured human skin fibroblast, thiram results in an increase in
oxidative markers such as lipid peroxidation and oxidation of
reduced glutathione and decrease in other endogenous antioxidant.
Toxic effects of thiram have been described in humans
and animal model systems ranging from liver injury, testicular
toxicity, ophthalmological changes, and development of
micronuclei in bone marrow. However, the mechanisms of
these effects are not characterized and inconsistent across
various studies. |
| Safety Data | Back Directory | [Hazard Codes ]
Xn,N | [Risk Statements ]
R20/22:Harmful by inhalation and if swallowed .
R36/38:Irritating to eyes and skin .
R43:May cause sensitization by skin contact.
R48/22:Harmful: danger of serious damage to health by prolonged exposure if swallowed .
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37:Wear suitable protective clothing and gloves .
S60:This material and/or its container must be disposed of as hazardous waste .
S61:Avoid release to the environment. Refer to special instructions safety data sheet . | [RIDADR ]
UN 2771/2811 | [WGK Germany ]
3
| [RTECS ]
JO1400000
| [Autoignition Temperature]
316 °F | [TSCA ]
Yes | [HazardClass ]
9 | [PackingGroup ]
III | [HS Code ]
29303000 | [Safety Profile]
Poison by ingestion and
intraperitoneal routes. Questionable
carcinogen with experimental tumorigenic
and teratogenic data. Other experimental
reproductive effects. Mutation data
reported, Affects human pulmonary system.
A rmld allergen and irritant. Acute poisoning
in experimental animals produced liver,
hdney, and brain damage. Dangerous in a
fire; see NITROGEN MONOXIDE and
SULFUR DIOXIDE. | [Hazardous Substances Data]
137-26-8(Hazardous Substances Data) | [IDLA]
100 mg/m3 |
| Questions And Answer | Back Directory | [Chemical properties]
pure colorless crystal; no smell; m.p.155~156°C; relative density 1.29; easily soluble in benzene, chloroform (230g/L), acetone (80g/L), carbon disulfide and other organic solvents; slightly soluble in ether and ethanol (<10g/L); insoluble in water (30mg/L); decomposing under acid condition; industrial products are white or light yellow powder, with a m.p. of more than 146℃. | [Toxicity]
Acute oral-rat: LD50 780~865mg/kg; Acute oral-mice: LD50 1500~2000mg/kg. Accelerator T has an irritation effect on the human mucous membrane and skin. People long-term exposure to it have allergic reactions while drinking alcohol. Carp LC50 4mg/L. | [Uses]
1. Tetramethylthiuram Disulfide belongs to protective fungicides of broad spectrum, with a residual effect period of up to 7d or so. It is mainly used for dealing with seeds and soil and preventing powdery mildew, smut and rice seedlings damping-off of cereal crops. It can also be used for some fruit trees and vegetable diseases. For example, dressing seed with 500g of 50% wettable powder can control rice blast, rice leaf spot, barley and wheat smut.
2. As pesticides, Tetramethylthiuram Disulfide is often referred to as thiram and is mainly used for the treatment of seeds and soil and the prevention and controlling of cereal powdery mildew, smut and vegetable diseases. This product, as the super accelerator of natural rubber, synthetic rubber and latex, is often referred to as accelerator TMTD and is the representative of thiuram vulcanization accelerator, accounting for 85% of the total amount of similar products. Accelerator T is also the super accelerator of natural rubber, diene synthetic rubber, Ⅱ, R and EPDM, with the highest utilization rate of all. The vulcanization promoting force of accelerator T is very strong, but, without the presence of zinc oxide, it is not vulcanized at all.
3. Used for the manufacture of cables, wires, tires and other rubber products.
4. Used as the super accelerator of natural rubber, synthetic rubber and latex.
5. Used as the late effect promoter of natural rubber, butadiene rubber, styrene-butadiene rubber and polyisoprene rubber.
6. Used for the pest control of rice, wheat, tobacco, sugar beet, grapes and other crops, as well as for the seed dressing and soil treatment.
7. Tetramethylthiuram Disulfide is suitable for the manufacture of natural rubber, synthetic rubber and latex, and can also be used as curing agent. This product is the second accelerator of thiazole accelerators, which can be used with other accelerators as the continuous vulcanization accelerator.
8. In rubber industry, Tetramethylthiuram Disulfide can be used as the super-vulcanization accelerator, and aften used with thiazole accelerator. It can also be used in combination with other accelerators as the continuous rubber accelerator. For slowly decomposing out of free sulfur at more than 100 ℃, it can be used as curing agent too. Its products have excellent resistance to aging and heat, so it is applicable to natural rubber, synthetic rubber and is mainly used in the manufacture of tires, tubes, shoes, cables and other industrial products. In agriculture, it can be used as fungicide and insecticide, and it can also be used as lubricant additives.
9. Production methods from dimethylamine, carbon disulfide, ammonia condensation reaction was dimethyl dithiocarbamate, and then by the oxidation of hydrogen peroxide to the finished product. | [Production method]
The preparation of sodium dimethyl dithiocarbamate(SDD): the reaction of dimethylamine hydrochloride and carbon disulfide in the presence of sodium hydroxide can generate sodium dimethylamino dithiocarbamate . The reaction temperature is 50~55℃ and the pH value is 8~9.
The preparation of thiram: the reaction of SDD (or Diram) and hydrogen peroxide in the presence of sulfuric acid can produce thiram. The reaction temperature is controlled at 10 ℃ below and the end pH value is 3 to 4. Chlorine can also be used instead of hydrogen peroxide and sulfuric acid. The reaction is performed in the sieve tray tower, from the bottom of which the diluted chlorine is introduced and from the top of which 5% sodium solution is sprayed, which is called chlorine-air oxidation method. There are also other methods, such as sodium nitrite oxidation or electrolytic oxidation. | [Hazards & Safety Information]
Category :Toxic substances
Toxicity classification : moderate toxicity
Acute Toxicity : Oral-Rat LD50: 560 mg/kg; Oral-mouse LD50: 1250 mg/kg
Stimulation Data: Eye-Rabbit 100 mg/24hours Moderate
Flammability Hazardous characteristics:
The products can decompose into toxic nitrogen oxides and sulfur oxides when meeting heat.
Storage and transportation characteristics :
Storehouse should be low-temperature, well-ventilated and dry; the storage and transportation should be separated form food raw materials.
Extinguishing agent : sand, dry powder, foam
Occupational Standard :TWA 5 mg/m3; STEL 10 mg/m3 |
|
|