Acryloylchlorid Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R11:Leichtentzündlich.
R14:Reagiert heftig mit Wasser.
R26:Sehr giftig beim Einatmen.
R34:Verursacht Ver?tzungen.
S-S?tze Betriebsanweisung:
S16:Von Zündquellen fernhalten - Nicht rauchen.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S7/9:Beh?lter dicht geschlossen an einem gut gelüfteten Ort aufbewahren.
Chemische Eigenschaften
Acryloyl chloride is a highly flammable, polymerizable, and toxic (inhalation), light yellow liquid. A lacrimator.
Verwenden
Acryloyl chloride is used in the production of plastics. It plays an important role in the preparation of acrylate monomers and polymers. It also acts as a substrate for cross-metathesis. Further, it is utilized in organic synthesis for the introduction of acrylic groups into other compounds.
Allgemeine Beschreibung
A liquid. Boiling point 75°C. Used to make plastics. Polymerization in a closed container can cause pressurization and explosive rupture.
Air & Water Reaktionen
Polymerizes readily upon exposure to oxygen in the air. Reacts exothermically with water to give hydrochloric acid and acrylic acid.
Reaktivit?t anzeigen
Acrylyl chloride is incompatible with strong oxidizing agents, alcohols, amines, alkali. Polymerizes readily upon exposure to oxygen. May react vigorously or explosively if mixed with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291].
Brandgefahr
When heated to decomposition, Acrylyl chloride emits toxic fumes of chlorides. Decomposes in water.
m?gliche Exposition
May be used as a monomer in preparation of specialty polymers or as a chemical intermediate
Versand/Shipping
UN3383 Poisonous Toxic by inhalation liquid, flammable, n.o.s. with an LC50 # 200 mL/m3 and saturated vapor concentration ≥500 LC50, Hazard class: 6.1; Labels: 6.1-Poisonous materials, 3-Flammable liquid, Technical Name Required, Inhalation Hazard Zone A. UN2924 Flammable liquids, corrosive, n.o.s., Hazard Class: 3; Labels: 3-Flammable liquid, 8-Corrosive material, Technical Name Required
Inkompatibilit?ten
Use MEHQ (monomethyl ether of hydroquinone) as an inhibitor. Incompatible with oxidizers, polymerizes on contact with oxygen; alcohols, amines, alkalis. Reacts violently with water, releasing hydrochloric acid and acrylic acid. Attacks some metals.
Acryloylchlorid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte