| Identification | More | [Name]
Acenaphthene | [CAS]
83-32-9 | [Synonyms]
NSC 7657
Acenaphthcn
acenaphtene
ACENAPHTHENE
acenaphylene
AcenaptheneGr
ACENAPHTHENE 99%
Acenaphthene,99%
Acenaphthene >
ACENAPHTHENE 96+%
Acenaphthene,>98%
ethylenenaphthalene
NAPHTHYLENEETHYLENE
acenaphtalenethylene
acenaphthene solution
Acenaphthene Standard
Acenaphthene, 99% 5GR
1,8-ETHYLENENAPHTHALENE
1,2-DIHYDROACENAPHTHENE
PERI-ETHYLENENAPHTHALENE
1,2-dihydroacenphthylene
Acenaphthene, extra pure
1,2-dihydro-acenaphthylen
1,2-DIHYDROACENAPHTHYLENE
1,8-dihydroacenaphthalene
Acenaphthene Zone Refined
1，2-Dihydroaceno-phthylene
ACENAPHTHENE, 5000MG, NEAT
Acenaphthene 1g [83-32-9]
Acenaphthene 5g [83-32-9]
Acenaphthylene, 1,2-dihydro-
COLOREX SALMONELLA PLUS (6X20)
AcenaphtheneSolution,10mg/L,1ml
AcenaphtheneSolution,50mg/L,1ml
AcenaphtheneSolution,500mg/L,1ml
AcenaphtheneSolution,100mg/L,1ml
ACENAPHTHENE FOR SYNTHESIS 100 G
AcenaphtheneSolution,100mg/L,10ml
AcenaphtheneSolution,1000mg/L,1ml
AcenaphtheneSolution,2000mg/L,1ml
ACENAPHTHENE, 1X1ML, MEOH, 200UG/ML
ACENAPHTHENE, 1X1ML, MEOH, 5000UG/ML
Acenaphthene,1,8-Ethylenenaphthalene
acenaphylene
1,8-Ethylenenaphthalene
Acenaphthene (1,2-Dihydro Acenaphthylene)
Acenaphthene Zone Refined (number of passes:30)
1,8-Ethylenenaphthalene1,2-Dihydroacenaphthylene
Acenaphthene Zone Refined (number of passes:30)>
Acenaphthene Zone Refined (nuMber of passes:30), 99.5%(GC) | [EINECS(EC#)]
201-469-6 | [Molecular Formula]
C12H10 | [MDL Number]
MFCD00003807 | [Molecular Weight]
154.21 | [MOL File]
83-32-9.mol |
| Chemical Properties | Back Directory | [Description]
Acenaphthene is a tricyclic aromatic hydrocarbon and crystalline solid at ambient
temperature. Acenaphthene does not dissolve in water but is soluble in many organic
solvents. Acenaphthene is a component of crude oil and a product of combustion.
Acenaphthene occurs in coal tar produced during the high-temperature carbonisation
or coking of coal. It is used as a dye intermediate in the manufacture of some plastics
and as an insecticide and fungicide. Acenaphthene is a component of crude oil
and a product of combustion which may be produced and released to the environment
during natural fires. Emissions from petroleum refining, coal tar distillation, coal
combustion, and diesel-fuelled engines are major contributors of acenaphthene to the
environment. Acenaphthene is an environmental pollutant and has been detected in
cigarette smoke, automobile exhausts, and urban air; in effluents from petrochemical,
pesticide, and wood preservative industries; and in soils, groundwater, and surface
waters at hazardous waste sites. This compound is one among a number of polycyclic
aromatic hydrocarbons (PAHs) on U.S. EPA’s (Environmental Protection Agency)
priority pollutant list. | [Appearance]
Acenaphthene is a white combustible, crystalline solid. PAHs are compounds containing multiple benzene rings and are also called polynuclear aromatic hydrocarbons | [Melting point ]
90-94 °C(lit.)
| [Boiling point ]
279 °C(lit.)
| [density ]
1.06
| [vapor density ]
5.32 (vs air)
| [vapor pressure ]
10 mm Hg ( 131 °C)
| [refractive index ]
1.6048 | [Fp ]
135 °C
| [storage temp. ]
APPROX 4°C
| [solubility ]
chloroform: 50 mg/mL, clear
| [form ]
crystalline
| [color ]
brown-beige
| [Stability:]
Stable. Incompatible with strong oxidizing agents. | [Water Solubility ]
0.000347 g/100 mL | [Merck ]
14,28 | [BRN ]
386081 | [Henry's Law Constant]
3.47, 6.21, 10.8, 18.3, and 28.2 at 4.1, 11.0, 18.0, 25.0, and 31.0 °C, respectively (Bamford et al.,
1998) | [Dielectric constant]
3.0 | [LogP]
4.04 at 30℃ and pH5-8 | [CAS DataBase Reference]
83-32-9(CAS DataBase Reference) | [IARC]
3 (Vol. 92) 2010 | [NIST Chemistry Reference]
Acenaphthene(83-32-9) | [EPA Substance Registry System]
83-32-9(EPA Substance) |
| Hazard Information | Back Directory | [Chemical Properties]
Acenaphthene is a tricyclic aromatic hydrocarbon, crystalline solid at ambient tempera-
ture. Acenaphthene does not dissolve in water, but is soluble in many organic solvents.
Acenaphthene occurs in coal tar produced during high temperature carbonization or cok-
ing of coal. It is used as a dye intermediate in the manufacture of some plastics and as
an insecticide and fungicide. Acenaphthene is a component of crude oil and a product
of combustion that may be produced and released into the environment during natural
fi
res. Emissions from petroleum refi
ning, coal tar distillation, coal combustion, and diesel-
fueled engines are major contributors of acenaphthene to the environment. Acenaphthene
is an environmental pollutant and has been detected in cigarette smoke, automobile
exhausts, and urban air; in effl
uents from petrochemical, pesticide, and wood preservative
industries; and in soils, groundwater, and surface waters at hazardous waste sites. This
compound is one of a number of polycyclic aromatic hydrocarbons on the US EPA’s prior-
ity pollutant list. | [General Description]
White needles. Melting point 93.6°C. Soluble in hot alcohol. Denser than water and insoluble in water. Hence sinks in water. May irritate skin and mucous membranes. Emits acrid smoke and irritating fumes when heated to decomposition. Derived from coal tar and used to make dyes, pharmaceuticals, insecticides, fungicides, and plastics. | [Reactivity Profile]
ACENAPHTHENE(83-32-9) is incompatible with strong oxidizing agents. Incompatible with ozone and chlorinating agents. Forms crystalline complexes with desoxycholic acid . | [Air & Water Reactions]
Insoluble in water. | [Health Hazard]
Exposures to acenaphthene cause poisoning and include symptoms such as irritation
to the skin, eyes, mucous membranes, and upper respiratory tract. Studies on labora-
tory animals orally exposed to acenaphthene showed loss of body weight, peripheral
blood changes (unspecifi
ed), increased aminotransferase levels in blood serum, and
mild morphological damage to the liver and kidneys. In chronic exposures, acenaph-
thene is known to cause damage to the kidneys and liver. Acenaphthene is irritating to
the skin and mucous membranes of humans and animals. Oral exposure of rats to ace-
naphthene for 32 days produced peripheral blood changes, mild liver and kidney dam-
age, and pulmonary effects. However, detailed studies with acenaphthene in humans
are limited. | [Potential Exposure]
Acenaphthene occurs naturally in coal tar and in coal tar produced during the high-temperature carbonization or coking of coal; coal tar distilling; petroleum processing; shale oil processing. It is used as an intermediate for dyes, fungicides, insecticides, herbicides, pharmaceuticals, plant growth hormones; 1,8 naphthalic acid; in the manufacture of some plastics; and has been detected in cigarette smoke and gasoline exhaust condensates; a constituent of coal tar creosote, asphalt, and diesel fuel. It has been used as an polyploidy agent. | [Fire Hazard]
Flash point data for this chemical are not available. ACENAPHTHENE is probably combustible. | [First aid]
If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. If this chemical contacts the skin, remove contaminated clothing and wash with soap immediately. When this chemical has been swallowed, get immediate medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. If this chemical has been inhaled, remove from exposure and transfer promptly to a medical facility. | [Shipping]
UN3082 Environmentally hazardous substances, liquid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required. | [Incompatibilities]
Ozone and strong oxidizing agents, including perchlorates, chlorine, fluorine, and bromine | [Waste Disposal]
Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office. Incineration or permanganate oxidation | [Physical properties]
White crystalline solid or orthorhombic bipyramidal needles from alcohol. Coal tar-like odor. The
lowest odor threshold concentration in water that may result in rejection of contaminated water
ranged from 0.02 to 0.22 ppm (Lillard and Powers, 1975). In Wisconsin, the taste and odor
threshold concentration in water that is nontoxic to humans is 20 μg/L (ATSDR, 1995). | [Uses]
Acenaphthene occurs in petroleum bottoms and is used as a
dye intermediate, insecticide, and fungicide and in
manufacturing plastics. | [Uses]
Dye intermediate; manufacture of plastics; insecticide; fungicide. | [Uses]
Polycyclic aromatic hydrocarbons as carcinogenic | [Definition]
A colorless crystalline derivative
of naphthalene, used in producing
some dyes. | [Definition]
acenaphthene: A colourless crystallinearomatic compound, C12H10;m.p. 95°C; b.p. 278°C. It is an intermediatein the production of somedyes. | [Definition]
ChEBI: A polycyclic aromatic hydrocarbon derived from naphthalene by the addition of an ethylene bridge connecting C-1 and C-8. | [Synthesis Reference(s)]
Synthetic Communications, 14, p. 1119, 1984 DOI: 10.1080/00397918408059644 | [Safety Profile]
Moderately toxic by intraperitonealroute. Mutation data reported.Incompatible with strongoxidizing agents, ozone, chlorinating agents. When heatedto decomposition it emits acrid smoke and irritating vapors. | [Source]
Detected in groundwater beneath a former coal gasification plant in Seattle, WA at a
concentration of 180 g/L (ASTR, 1995). Acenaphthene is present in tobacco smoke, asphalt,
combustion of aromatic fuels containing pyridine (quoted, Verschueren, 1983). Acenaphthene was
detected in asphalt fumes at an average concentration of 18.65 ng/m3 (Wang et al., 2001). Present
in diesel fuel and corresponding aqueous phase (distilled water) at concentrations of 100 to 600
mg/L and 4 to 14 g/L, respectively (Lee et al., 1992).
Thomas and Delfino (1991) equilibrated contaminant-free groundwater collected from
Gainesville, FL with individual fractions of three individual petroleum products at 24–25 °C for
24 h. The aqueous phase was analyzed for organic compounds via U.S. EPA approved test method
625. Average acenaphthene concentrations reported in water-soluble fractions of unleaded gasoline, kerosene, and diesel fuel were 1, 2, and 6 g/L, respectively.
Acenaphthene occurs naturally in coal tar. Based on laboratory analysis of 7 coal tar samples,
acenaphthene concentrations ranged from 350 to 12,000 ppm (EPRI, 1990). Detected in 1-yr aged
coal tar film and bulk coal tar at concentrations of 5,800 and 5,900 mg/kg, respectively (Nelson et
al., 1996). A high-temperature coal tar contained acenaphthene at an average concentration of 1.05
wt % (McNeil, 1983). Lee et al. (1992a) equilibrated 8 coal tars with distilled water at 25 °C. The
maximum concentration of acenaphthene observed in the aqueous phase was 0.3 mg/L.
Nine commercially available creosote samples contained acenaphthene at concentrations
ranging from 9,500 to 110,000 mg/kg (Kohler et al., 2000).
Acenaphthene was detected in a diesel-powered medium duty truck exhaust at an emission rate
of 19.3 μg/km (Schauer et al., 1999) and is a component in cigarette smoke. Acenaphthene was
detected in soot generated from underventilated combustion of natural gas doped with 3 mole %
toluene (Tolocka and Miller, 1995).
Gas-phase tailpipe emission rates from gasoline-powered automobiles with and without
catalytic converters were 6.55 and 177 μg/km, respectively (Schauer et al., 2002).
Schauer et al. (2001) measured organic compound emission rates for volatile organic
compounds, gas-phase semi-volatile organic compounds, and particle-phase organic compounds
from the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emission
rates of acenaphthene were 2.02 mg/kg of pine burned, 1.15 mg/kg of oak burned, and 0.893
mg/kg of eucalyptus burned.
Under atmospheric conditions, a low rank coal (0.5–1 mm particle size) from Spain was burned
in a fluidized bed reactor at seven different temperatures (50 °C increments) beginning at 650 °C.
The combustion experiment was also conducted at different amounts of excess oxygen (5 to 40%)
and different flow rates (700 to 1,100 L/h). At 20% excess oxygen and a flow rate of 860 L/h, the
amount of acenaphthene emitted ranged from 1,272.4 ng/kg at 650 °C to 6,800.0 ng/kg at 750 °C.
The greatest amount of PAHs emitted was observed at 750 °C (Mastral et al., 1999).
Typical concentration of acenaphthene in a heavy pyrolysis oil is 1.6 wt % (Chevron Phillips,
May 2003). | [Environmental Fate]
Biological. When acenaphthene was statically incubated in the dark at 25 °C with yeast extract
and settled domestic wastewater inoculum, significant biodegradation with rapid adaptation was
observed. At concentrations of 5 and 10 mg/L, 95 and 100% biodegradation, respectively, were
observed after 7 d (Tabak et al., 1981). A Beijerinckia sp. and a mutant strain (Beijerinckia sp.
strain B8/36) cooxidized acenaphthene to the following metabolites: 1,2-acenaphthenediol,
acenaphthene-quinone, and a compound tentatively identified as 1,2-dihydroxyacenaphthylene
(Schocken and Gibson, 1984). The fungus Cunninghamella elegans ATCC 36112 degraded
approximately 64% acenaphthene added within 72 h of incubation. Metabolites identified and
their respective yields were 6-hydroxyacenaphthenone (24.8%), 1,2-acenaphthenedione (19.9%),
trans-1,2-dihydroxyacenaphthene (10.3%), 1,5-dihydroxyacenaphthene (2.7%), 1-acenaphthenol
(2.4%), 1-acenaphthenone (2.1%), and cis-1,2-dihydroxyacenaphthene (1.8%) (Pothuluri et al.,
1992). A recombinant strain of Pseudomonas aeruginosa PAO1(pRE695) degraded acenaphthene
via mono-oxygenation to 1-acenaphthenol which was converted to 1-acenaphthenone and cis- and
trans-1,2-dihydroxyacenaphthenes. The two latter compounds were subsequently converted to 1,2-
acenaphthoquinone which oxidized to naphthalene-1,8-dicarboxylic acid (Selifonov et al., 1996).
In a soil-water system, acenaphthene did not biodegrade under anaerobic conditions. Under
denitrification conditions, acenaphthene (water concentration 400 μg/L) degraded to nondetectable
levels in 40 d. In both studies, the acclimation period was approximately 2 d (Mihelcic
and Luthy, 1988).
Photolytic. Fukuda et al. (1988) studied the photodegradation of acenaphthene and alkylated
naphthalenes in distilled water and artificial seawater using a high-pressure mercury lamp. Based
upon a rate constant of 0.23/h, the photolytic half-life of acenaphthene in water is 3 h. Behymer
and Hites (1985) determined the effect of different substrates on the rate of photooxidation of
acenaphthene using a rotary photoreactor equipped with a 450-W medium pressure mercury lamp
(λ = 300–410 nm). The photolytic half-lives of acenaphthene absorbed onto silica gel, alumina,
and fly ash were 2.0, 2.2, and 44 h, respectively. The estimated photooxidation half-life of
acenaphthene in the atmosphere via OH radicals is 0.879 to 8.79 h (Atkinson, 1987).
Chemical/Physical. Ozonation in water at 60 °C produced 7-formyl-1-indanone, 1-indanone, 7-
hydroxy-1-indanone, 1-indanone-7-carboxylic acid, indane-1,7-dicarboxylic acid, and indane-1-
formyl-7-carboxylic acid (Chen et al., 1979). Wet oxidation of acenaphthene at 320 °C yielded
formic and acetic acids (Randall and Knopp, 1980). The measured rate constant for the gas-phase
reaction of acenaphthene with OH radicals is 8.0 x 10-11 cm3/molecule·sec (Reisen and Arey,
2002). | [Purification Methods]
It has also been purified by chromatography from CCl4 on alumina with *benzene as eluent [McLaughlin & Zainal J Chem Soc 2485 1960]. [Beilstein 5 IV 1834.] |
| Safety Data | Back Directory | [Hazard Codes ]
Xi,N,T,F,Xn | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin .
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R39/23/24/25:Toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed .
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed .
R11:Highly Flammable.
R52/53:Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R67:Vapors may cause drowsiness and dizziness.
R65:Harmful: May cause lung damage if swallowed.
R38:Irritating to the skin. | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S60:This material and/or its container must be disposed of as hazardous waste .
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S37/39:Wear suitable gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S36/37:Wear suitable protective clothing and gloves .
S16:Keep away from sources of ignition-No smoking .
S7:Keep container tightly closed .
S62:If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label .
S36:Wear suitable protective clothing . | [RIDADR ]
UN 3077 9/PG 3
| [WGK Germany ]
3
| [RTECS ]
AB1000000
| [Autoignition Temperature]
>450 °C | [TSCA ]
Yes | [HazardClass ]
9 | [PackingGroup ]
III | [HS Code ]
29029080 | [Hazardous Substances Data]
83-32-9(Hazardous Substances Data) | [Toxicity]
LD50 orally in Rabbit: > 16000 mg/kg |
| Raw materials And Preparation Products | Back Directory | [Raw materials]
COAL TAR-->Polishing oil | [Preparation Products]
1,8-Naphthalic anhydride-->1,8-NAPHTHALIC ACID-->fluorescent whitening agent EFR-->1,4,5,8-Naphthalenetetracarboxylic acid-->Acenaphthenequinone-->ACENAPHTHYLENE-->1-AMINO-8-NAPHTHOIC ACID-->4,5-Dichloronaphthalene-1,8-dicarboxylic anhydride-->4-Bromo-1,8-naphthalic anhydride-->5-NITROACENAPHTHENE-->Acenaphthylene, 1,2-dihydro-1-methoxy--->2a,3,4,5-Tetrahydroacenaphthene-->5-bromoacenaphthylene-1,2-dione-->3,9-perylenedicarboxylic acid-->DECACYCLENE-->1-Acenaphthenone |
|
|