| Identification | More | [Name]
Dimethyldicyane | [CAS]
6864-37-5 | [Synonyms]
2,2'-DIMETHYL-4,4'-METHYLENEBIS(CYCLOHEXYLAMINE)
4,4'-DIAMINO-3,3'-DIMETHYLDICYCLOHEXYLMETHANE
4,4'-METHYLENEBIS(1-AMINO-2-METHYLCYCLOHEXANE)
4,4'-METHYLENEBIS(2-METHYLCYCLOHEXYLAMINE)
BIS(4-AMINO-3-METHYLCYCLOHEXYL)METHANE
3,3’-Dimethyl-4,4’-diaminodicyclohexylmethane
4,4’-methylenebis[2-methyl-cyclohexanamin
4,4’-methylenebis[2-methyl-Cyclohexanamine
di(4-amino-3-methylcyclohexyl)methane
4,4'-METHYLENEBIS(2-METHYLCYCLOHEXYL-AMI NE), 99%, MIXTURE OF ISOMERS
4,4'-Methylenebis(2-methylcyclohexylamine)4,4'-methylenebis(2-methylcyclohexylamine)(mixtureofisomers)
Bis[3-methyl-4-aminocyclohexyl] methane
Cyclohexanamine, 4,4-methylenebis2-methyl-
4,4'-methylenebis(2-methylcyclohexylamine), mixture of isomers
Dimethyldicycan
DIMETHYLDICYANE
4,4''-METHYLENEBIS(2-METHYLCYCLOHEXYLAMINE) (MIXTURE OF ISOMERS) 98+%
DMDC
2,2'-Dimethyl[4,4'-methylenebis(cyclohexane-1-amine)]
4,4'-Methylenebis(2-methyl-1-cyclohexanamine) | [EINECS(EC#)]
229-962-1 | [Molecular Formula]
C15H30N2 | [MDL Number]
MFCD00075535 | [Molecular Weight]
238.41 | [MOL File]
6864-37-5.mol |
| Chemical Properties | Back Directory | [Melting point ]
-7°C | [Boiling point ]
93-100 °C(lit.)
| [density ]
0.94 g/mL at 25 °C(lit.)
| [vapor pressure ]
0.08Pa at 20℃ | [refractive index ]
n20/D 1.499(lit.)
| [Fp ]
>230 °F
| [storage temp. ]
Keep in dark place,Inert atmosphere,Room temperature | [solubility ]
3.6g/l | [form ]
clear liquid | [pka]
11.03±0.70(Predicted) | [color ]
Colorless to Light yellow to Light orange | [PH]
11 (3.6g/l, H2O, 20℃) | [explosive limit]
0.5-2.8%(V) | [Water Solubility ]
2.01g/L at 20℃ | [InChIKey]
IGSBHTZEJMPDSZ-UHFFFAOYSA-N | [LogP]
2.3 at 23℃ | [CAS DataBase Reference]
6864-37-5(CAS DataBase Reference) | [EPA Substance Registry System]
6864-37-5(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
T,C,N | [Risk Statements ]
R22:Harmful if swallowed.
R23/24:Toxic by inhalation and in contact with skin .
R35:Causes severe burns.
R51/53:Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S61:Avoid release to the environment. Refer to special instructions safety data sheet . | [RIDADR ]
UN 2927 6.1/PG 2
| [WGK Germany ]
3
| [HazardClass ]
8 | [PackingGroup ]
II | [HS Code ]
29213000 | [Toxicity]
LC50 ihl-rat: 420 mg/m3/4H NTIS** OTS0539620-1 |
| Hazard Information | Back Directory | [Hazard]
Moderately toxic by inhalation.
| [Chemical Properties]
Colorless transparent viscous liquid | [Uses]
4,4'-Methylenebis(2-methylcyclohexylamine) can be used as epoxy curing agents.
| [General Description]
4,4′-Methylenebis(2-methylcyclohexylamine) is an alicyclic diamine. | [Flammability and Explosibility]
Nonflammable | [Safety Profile]
Moderately toxic by inhalation.When heated to decomposition it emits toxic vapors ofNOx. | [Synthesis]
Add 2000kg 3,3'-dimethyl-4,4'-diaminodiphenylmethane and 2000kg tetrahydrofuran to an autoclave with a volume of 6000L. Then, 100Kg 5% Ru/Al2O3 catalyst and 100Kg aluminum ammonium sulfate will be added, and the air in the autoclave will be replaced with hydrogen after sealing. Pour in 6MPa hydrogen, heat the autoclave to 160°C, adjust the hydrogen valve to maintain the pressure at 8MPa, and stir vigorously for 4 hours. After cooling, samples were taken and detected by gas chromatography-mass spectrometry. The detection results showed that the conversion rate of 3,3'-dimethyl-4,4-diaminodicyclohexylmethane was 100%, and the 4,4'-Methylenebis(2-methylcyclohexylamine) (MACM) yield was 99.4%.
|
|
|