| Identification | More | [Name]
3-Bromoanisole | [CAS]
2398-37-0 | [Synonyms]
1-BROMO-3-METHOXYBENZENE
3-BROMO ANISOL
3-BROMOANISOLE
5-bromoanisole
BROMOANISOLE(3-)
M-BROMOANISOLE
META BROMO ANISOLE
TIMTEC-BB SBB007886
1-bromo-3-methoxy-benzen
3-Methoxy-1-bromobenzene
3-Methoxybromobenzene
3-Methoxyphenyl bromide
Anisole, m-bromo-
m-Anisyl bromide
m-Bromomethoxybenzene
m-Bromophenyl methyl ether
m-Bromophenylmethylether
m-Methoxybromobenzene
m-Methoxyphenyl bromide
m-Bromoanisoles | [EINECS(EC#)]
219-264-5 | [Molecular Formula]
C7H7BrO | [MDL Number]
MFCD00000081 | [Molecular Weight]
187.03 | [MOL File]
2398-37-0.mol |
| Chemical Properties | Back Directory | [Appearance]
Colorless Clear Liquid | [Melting point ]
2 °C
| [Boiling point ]
210-211 °C(lit.)
| [density ]
1.490 g/mL at 20 °C
| [vapor pressure ]
38.39Pa at 25℃ | [refractive index ]
n20/D 1.563(lit.)
| [Fp ]
200 °F
| [storage temp. ]
Sealed in dry,Room Temperature | [solubility ]
DMSO (Sparingly), Methanol (Slightly) | [form ]
Liquid | [color ]
Clear colorless to slightly yellow-brown | [Specific Gravity]
1.477 | [PH]
5.5 (H2O, 20℃) | [Stability:]
Stable. Combustible. Incompatible with strong oxidising agents, strong acids reducing agents. | [Water Solubility ]
Miscible in methanol, benzene, hexane, toluene and dichloromethane. Practically insoluble in water. | [BRN ]
1524687 | [InChIKey]
PLDWAJLZAAHOGG-UHFFFAOYSA-N | [LogP]
3.03 | [CAS DataBase Reference]
2398-37-0(CAS DataBase Reference) | [NIST Chemistry Reference]
Benzene, 1-bromo-3-methoxy-(2398-37-0) | [EPA Substance Registry System]
2398-37-0(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
Xi | [Safety Statements ]
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S24/25:Avoid contact with skin and eyes . | [WGK Germany ]
3
| [F ]
8 | [Hazard Note ]
Irritant | [TSCA ]
T | [HS Code ]
29093038 |
| Hazard Information | Back Directory | [Chemical Properties]
3-Bromoanisole, also known as m-Bromoanisole, is a clear colorless to pale yellow oily liquid. The boiling point is 210-211°C (100kPa), 105°C (2.13kPa), the relative density is 1.477, the refractive index is 1.5635, and the flash point is 93°C. It is soluble in alcohol, ether, benzene, and carbon disulfide, but insoluble in water. It is commonly used as a raw material for organic synthesis.
| [Uses]
3-Bromoanisole used in chemical reaction as intermediates to obtain target materials such as dyes, pharmaceuticals, perfumes, photoinitiators and agrochemicals. | [Preparation]
3-Bromoanisole is synthesized through a reaction between m-bromophenol and dimethyl sulfate. The synthesis method involves the following steps:
Dissolve m-bromophenol in a sodium hydroxide solution.
Slowly add dimethyl sulfate dropwise to the solution while stirring.
Heat the mixture and allow it to react for 1 hour.
Cool the reaction mixture to separate the colorless oil formed.
Extract the water layer with ether.
Dry the ether extract and then distill it to recover the ether.
Distill the residue obtained after recovering the ether, along with the colorless oil, under reduced pressure.
This distillation process results in the production of m-bromoanisole as the final product.
The overall yield of m-bromoanisole achieved through this process is 90%. | [References]
Application of Anisole, 2-Bromoanisole and 3-Bromoanisole as Overcharge Protection Additives in Lithium-Ion Batteries DOI:10.6023/A12110964
S. Ramalingam; S. Periandy. Spectroscopic investigation, computed IR intensity, Raman activity and vibrational frequency analysis on 3-bromoanisole using HF and DFT (LSDA/MPW1PW91) calculations. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy. 2011, 78 (2), 835-843. DOI:10.1016/j.saa.2010.12.043
Bobby Glover; Kimberly A. Harvey; Bing Liu; Matthew J. Sharp; and Maria F. Tymoschenko. Regioselective Palladium-Catalyzed Arylation of 3-Carboalkoxy Furan and Thiophene. Org. Lett. 2003, 5 (3), 301-304. DOI:10.1021/ol027266q |
|
|