Identification | More | [Name]
ANTIMONY(III) SULFIDE | [CAS]
1345-04-6 | [Synonyms]
Antimonous sulfide ANTIMONY(+3)SULFIDE ANTIMONY(III) SULFIDE ANTIMONY(III) SULFIDE, BLACK ANTIMONY (II) SULFIDE ANTIMONY OXYSULFIDE ANTIMONY RED ANTIMONY SULFIDE ANTIMONY SULFIDE, OXY ANTIMONY SULFIDE, TRI ANTIMONY TRISULFIDE ANTIMONY TRISULFIDE, BLACK ANTIMONY TRISULFIDE-RED STIBNITE antimonyorange antimonysesquisulfide antimonysulfide(sb2s3) antimonysulfides3sb2 antimonytrisulfidecolloid antimonyvermilion | [EINECS(EC#)]
215-713-4 | [Molecular Formula]
S3Sb2 | [MDL Number]
MFCD00011217 | [Molecular Weight]
339.71 | [MOL File]
1345-04-6.mol |
Chemical Properties | Back Directory | [Appearance]
black powder | [Melting point ]
550 °C(lit.)
| [Boiling point ]
1150 °C
| [density ]
4.64 g/mL at 25 °C(lit.)
| [refractive index ]
4.303 | [solubility ]
insoluble in H2O; soluble in concentrated HCl | [form ]
powder
| [color ]
Dark gray to black | [Specific Gravity]
4.64 | [Stability:]
Stable. Incompatible with acids (reacting to form poisonous hydrogen sulfide), moisture, water. | [Water Solubility ]
Soluble in concentrated acids. Insoluble in water. | [Merck ]
14,713 | [Exposure limits]
ACGIH: TWA 0.5 mg/m3 NIOSH: IDLH 50 mg/m3; TWA 0.5 mg/m3 | [CAS DataBase Reference]
1345-04-6(CAS DataBase Reference) | [IARC]
3 (Vol. 47) 1989 | [EPA Substance Registry System]
Antimony trisulfide (1345-04-6) |
Safety Data | Back Directory | [Hazard Codes ]
Xn | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . R20/21/22:Harmful by inhalation, in contact with skin and if swallowed . | [Safety Statements ]
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection . S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . | [RIDADR ]
UN 1549 6.1/PG 3
| [WGK Germany ]
2
| [RTECS ]
CC9450000
| [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
III | [HS Code ]
28309020 | [Safety Profile]
Poison by
intraperitoneal route. Human blood and
gastrointestinal system effects by inhalation.
Questionable carcinogen. See also
ANTIMONY COMPOUNDS and
SULFIDES. Spontaneously flammable
when exposed to strong oxidizers.
Flammable when exposed to heat or flame.
Moderately explosive by spontaneous
reaction with chlorates, perchlorates, Cl0,
thallic oxide. When heated to decomposition
or on contact with acid or acid fumes it
emits highly toxic fumes of oxides of sulfur
and antimony. Will react with water or
steam to produce toxic and flammable
vapors. | [Hazardous Substances Data]
1345-04-6(Hazardous Substances Data) | [Toxicity]
LD i.p. in rats: 100.0 mg Sb/100 g (Bradley, Fredrick) |
Hazard Information | Back Directory | [Hazard]
Explosion risk in contact with oxidizing
materials. Questionable carcinogen. | [Chemical Properties]
black powder | [Physical properties]
Natural stibnite is black orthorhombic crystal; or grayish-black powder; the compound also exists as an amorphous substance in yellow-red modification; distorted octahedral arrangement; density 4.64 g/cm3 for the natural stibnite and 4.12 g/cm3 for the red modification; melts at 550°C; vaporizes around 1150°C; insoluble in water (1.75mg/L at 18°C) and acetic acid; soluble in hydrochloric acid and caustic soda solution; also, soluble in alcohol, ammonium hydrosulfide and potassium sulfide. | [Occurrence]
Antimony trisulfide occurs in nature primarily as the mineral, stibnite, which consists of two parallel Sb4S6 chains linked together. It is used in fireworks; in certain types of safety matches; as a pigment in paints; and in the manufacture of ruby glass. | [Uses]
Antimony trisulfide is better known as the mineral stibnite
and is used as a yellow paint pigment and in the manufacture of ruby glass, fireworks, and
matches. It is also used to make percussion caps that set off explosives. | [Uses]
In pyrotechnics, Bengal fires; manufacture of ruby glass, matches, explosives; as a pigment in paints. | [Preparation]
The pure sulphide is obtained from its ore. Stibnite is separated from other ores by grinding and flotation. The ore is then heated to 550-600°C in a perforated vessel. The pure molten material is collected and cooled. It is also prepared by passing hydrogen sulfide into a solution of antimony trichloride: 2 SbCl3 + 3 H2S → Sb2S3 + 6 HCl or treating antimony trichloride solution with sodium thiosulfate. Alternatively, heating antimony metal or antimony trioxide with sulfur forms antimony trisulfide:2 Sb + 3 S → Sb2S3 2 Sb2O3 + 9 S → 2 Sb2S3 + 3 SO2 All these above preparative methods yield amorphous antimony trisulfide. | [Flammability and Explosibility]
Nonflammable |
|
|