| Identification | More | [Name]
n-Butyllithium | [CAS]
109-72-8 | [Synonyms]
BUTYLLITHIUM
LITHIUM-1-BUTANIDE
LITHIUMBUTYL
N-BULI
N-BUTYLLITHIUM
butyl-lithiu
Lithiumn-butyl
Butyllithium solution
ButyllithiuminhexaneM
BUTYLLITHIUM SOLUTION, ~2.7 M IN HEPTANE
BUTYLLITHIUM SOLUTION, ~2.5 M IN TOLUENE
BUTYLLITHIUM, 2.5M SOLUTION IN HEXANES
BUTYLLITHIUM, 2.0M SOLUTION IN PENTANE
BUTYLLITHIUM, 1.6M SOLUTION IN HEXANES
BUTYLLITHIUM SOLUTION, ~1.6 M IN HEXANE
BUTYLLITHIUM, 2.0M SOLUTION IN CYCLOHEXA NE
BUTYLLITHIUM SOLUTION, ~10 M IN HEXANE
BUTYLLITHIUM, 10.0M SOLUTION IN HEXANES
N-butyl lithium Solution
n-utyllithium | [EINECS(EC#)]
203-698-7 | [Molecular Formula]
C4H9Li | [MDL Number]
MFCD00009414 | [Molecular Weight]
64.06 | [MOL File]
109-72-8.mol |
| Chemical Properties | Back Directory | [Appearance]
clear yellow-orange to orange-red solution | [Melting point ]
-95 °C
| [Boiling point ]
80 °C
| [density ]
0.68 g/mL at 20 °C
| [Fp ]
10 °F
| [storage temp. ]
2-8°C
| [solubility ]
Miscible with diethyl ether and cyclohexane. | [form ]
liquid
| [color ]
yellow
| [Specific Gravity]
0.695 | [Odor]
Odor of the solvent | [Water Solubility ]
vigorous reaction | [Hydrolytic Sensitivity]
8: reacts rapidly with moisture, water, protic solvents | [Sensitive ]
Air & Moisture Sensitive | [BRN ]
1209227 | [Exposure limits]
ACGIH: TWA 50 ppm (Skin)
OSHA: TWA 500 ppm(1800 mg/m3)
NIOSH: IDLH 1100 ppm; TWA 50 ppm(180 mg/m3) | [LogP]
1.25-2.31 | [CAS DataBase Reference]
109-72-8(CAS DataBase Reference) | [NIST Chemistry Reference]
Butyl lithium(109-72-8) | [Storage Precautions]
Air sensitive;Store under nitrogen;Moisture sensitive | [EPA Substance Registry System]
109-72-8(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
F,C,N | [Risk Statements ]
R14/15:Reacts violently with water, liberating extremely flammable gases .
R17:Spontaneously flammable in air.
R34:Causes burns.
R48/20:Harmful: danger of serious damage to health by prolonged exposure through inhalation .
R51/53:Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R62:Possible risk of impaired fertility.
R65:Harmful: May cause lung damage if swallowed.
R67:Vapors may cause drowsiness and dizziness.
R63:Possible risk of harm to the unborn child.
R35:Causes severe burns.
R11:Highly Flammable.
R15:Contact with water liberates extremely flammable gases.
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R66:Repeated exposure may cause skin dryness or cracking. | [Safety Statements ]
S6:Keep under ... (inert gas to be specified by the manufacturer) .
S9:Keep container in a well-ventilated place .
S16:Keep away from sources of ignition-No smoking .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S62:If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label .
S46:If swallowed, seek medical advice immediately and show this container or label .
S43:In case of fire, use ... (indicate in the space the precise type of fire-fighting equipment. If water increases the risk add-Never use water) .
S60:This material and/or its container must be disposed of as hazardous waste .
S33:Take precautionary measures against static discharges .
S29:Do not empty into drains .
S5:Keep contents under ... (appropriate liquid to be specified by the manufacturer) . | [RIDADR ]
UN 3399 4.3/PG 1
| [WGK Germany ]
3
| [F ]
3-10 | [TSCA ]
Yes | [HazardClass ]
4.3 | [PackingGroup ]
I | [HS Code ]
29319090 | [Toxicity]
There is little toxicity data available for the
butyllithiums; for data on ether and hydrocarbon
solvents, see the appropriate LCSSs. |
| Raw materials And Preparation Products | Back Directory | [Raw materials]
Hexane-->Lithium-->1-Bromobutane-->1-Chlorobutane | [Preparation Products]
2-Cyanophenylboronic acid-->2-Bromopyridine-5-boronic acid-->1-BENZOTHIOPHENE-2-SULFONYL CHLORIDE-->4-Hydroxyphenylboronic acid-->5-Methoxypyridine-3-boronic acid-->2,3-Difluorophenylboronic acid-->5-Bromopyridine-3-boronic acid-->2-BROMOPYRIDIN-3-YLBORONIC ACID-->GRANISETRON-D3-->Ethyl 1-methyl-1H-pyrazole-5-carboxylate-->4-METHYLDIBENZOTHIOPHENE-->(4-METHOXYPHENYL)-BORANE-->4,5-DIBROMOTHIOPHENE-2-CARBOXALDEHYDE-->4-Carboxylphenylboronic acid pinacol ester-->2,5-Dichlorophenylboronic acid-->5-BROMOPYRIDINE-2-CARBONYL CHLORIDE-->4-N-BUTYLTOLUENE-->1-Naphthylboronic acid-->2,3,6-TRIFLUOROBENZOIC ACID-->5-Chloropyridine-2-boronic acid-->TRIS(PENTAFLUOROPHENYL)BORANE-->4-CHLORO-2-METHYLPHENYLBORONIC ACID-->3-ISOPROPYLPHENYLBORONIC ACID-->2-Bromo-5-iodopyridine-->2-Chloropyridine-5-boronic acid-->3,4,5-TRICHLOROTHIOPHENE-2-CARBONYL CHLORIDE-->5-Methyl-2-pyridineboronic acid-->3-BROMO-1-BENZOFURAN-->2,4-Dibromothiophene-->1-Methyl-1H-pyrazole-5-carboxylic acid-->2,3,4-Tribromothiophene-->2,4,6-Trifluorobenzoic acid-->METHYL 3-BROMOTHIOPHENE-2-CARBOXYLATE-->2,4,6-Trichlorobenzoic acid-->DIMETHYL(3-PHENOXY-2-OXOPROPYL)PHOSPHONATE-->Benzofuran-2-boronic acid-->ETHYL 5-CHLOROTHIOPHENE-2-CARBOXYLATE-->Isoquinoline-4-carbaldehyde-->Fenarimol-->1,3-Thiazole-2-carbaldehyde |
| Questions And Answer | Back Directory | [Chemical Properties]
n-Butyllithium is a Colorless or slightly yellow transparent liquid at room temperature, also comes in powder form. Boiling point is 80-90℃（0.013Pa）, relative density is 0.68-0.70. Soluble in many organic solvents. Stable in room temperature, lithium hydride removable by heating. Disintegrates in water, soluble in hydrocarbons and ethers, forms complex compounds with ethers, amines, and sulfides, and uses N-hexane as a solvent.
| [Uses]
N-Butyllithium solution is mostly used as a pharmaceutical intermediate to synthesize anionic polymerization initiator. It is also used to produce rubber (such as integral rubber SIBR, which is the most versatile diene rubber to date), fragrance, liquid crystal materials, and other industries. It is a chemical product intermediate, linking agent, alkylating agent, and polymerization catalyst. As a catalyst, N-Butyllithium is widely used as a pharmaceutical intermediate, liquid crystal monomer, and pesticide production catalyst.
N-Butyllithium is also widely used in organic syntheses, especially in growing carbon chains, and it is a staple laboratory product in reactions such as:
1) Metallization reaction: R-H + n-Butyl-Li → R-Li + Butane, in which the produced lithium alkyl can react with many substances.
2) Direct metallization: the aromatic compound that connects the substitute reacts with N-Butyllithium, and lithium metal can be attached to the aromatic compound.
3) Nucleophilic addition and substitution reaction.
4) Halogen-metal replacement.
| [Identifying Procedures]
N-Butyllithium must be calibrated through single titration as follows:
1) Titration solution: 1mol/L SEC butanol/dimethylbenzene solution (butanol and dimethylbenzene must be dried with an activated 5A molecular sieve)
2) Indicator: 2,2’-dipyridine
3) Solvent: dimethylbenzene (must be dried with an activated 5A molecular sieve).
4) Operation method: Under the protection of argon, add magneton, 20ml dimethylbenzene and a small amount of indicator into a 100ml 3-lipped bottle with a tipping plug. Then use a precisely marked 2ml injector to swiftly transfer 2ml N-Butyllithium into the bottle (the air in the injector must be replaced with argon, which must then be expelled when collecting the N-Butyllithium; fill and drain the injector in the N-Butyllithium multiple times to prevent any water or air from remaining in the injector). The system should turn a purplish red. Then, wash, dry, and rinse the same injector with titration solution 2-3 times (to prevent any change in the amount added) and titrate the solution until the system turns yellow, and cease titration.
5) Repeat titration once; if the percent error between the two times is within 2%, the result can be regarded as correct.
6) Titration result: titration solution (ml)/2 to obtain N-Butyllithium concentration.
| [Warnings and precautions]
1) N-Butyllithium is extremely combustible when in contact with air; when measuring, the needle of the injector will eject sparks.
2) The entire process must be protected by argon for safety precaution.
3) If N-Butyllithium catches fire, it must be extinguished with sand, which must be placed within arm’s reach at all times.
When preparing and using N-Butyllithium, do not operate alone in case of emergency
| [Category]
Spontaneously combustible when in contact with water
| [Explosivity characteristics]
May explode in combination with phenylethylene
| [Flammability characertistics]
Combusts in air at a concentration abover 20%; combusts upon contact with water and carbon dioxide; flammable when in contact with heat and open flame.
| [Storage]
Store in ventilated, cool and dry spaces; must be waterproof and carbon dioxide-proof.
| [Extinguisher]
Dry powder
|
| Hazard Information | Back Directory | [Definition]
ChEBI: Butyllithium is an alkyllithium compound. | [Preparation]
Industrially, n-butyllithium is produced by the
reaction of n-butyl chloride with lithium metal dispersion in various hydrocarbon solvents.
Hexane is the most commonly used solvent. Up to one-half of the lithium is replaced with
sodium in order to lower the cost of the butyllithium and increase the reactivity of the dispersion.
The reaction is carried out below the boiling point of the solvent.
The laboratory procedure is essentially the same except that pentane and diethyl ether
are two of the more popular solvents. The preparation runs smoothly in ether at lower
temperatures but the product must either be used immediately or kept refrigerated due to
the rapid cleavage of ether by n-butyllithium. | [Flammability and Explosibility]
The risk of fire or explosion on exposure of butyllithium solutions to the atmosphere
depends on the identity of the organolithium compound, the nature of the solvent,
the concentration of the solution, and the humidity. t-Butyllithium solutions are the
most pyrophoric and may ignite spontaneously on exposure to air. Dilute solutions
(1.6 M, 15% or less) of n-butyllithium in hydrocarbon solvents, although highly
flammable, have a low degree of pyrophoricity and do not spontaneously ignite.
Under normal laboratory conditions (25 °C, relative humidity of 70% or less),
solutions of -20% concentration will usually not ignite spontaneously on exposure to
air. More concentrated solutions of n-butyllithium (50 to 80%) are most dangerous
and will immediately ignite on exposure to air. Contact with water or moist materials
can lead to fires and explosions, and the butyllithiums also react violently with
oxygen. | [Incompatibilities]
The butyllithiums are extremely reactive organometallic compounds. Violent
explosions occur on contact with water with ignition of the solvent and of the butane
produced. t-Butyllithium will ignite spontaneously in air. The butyllithiums ignite on
contact with water, carbon dioxide, and halogenated hydrocarbons. The
butyllithiums are incompatible with acids, halogenated hydrocarbons, alcohols, and
many other classes of organic compounds. | [Waste Disposal]
Excess butyllithium solution can be destroyed by dilution with hydrocarbon solvent to a concentration of
approximately 5 wt %, followed by gradual addition to water with vigorous stirring under an inert
atmosphere. Alternatively, the butyllithium solution can be slowly poured (transfer by cannula for s- or tbutyllithium)
into a plastic tub or other container of powdered dry ice.
The residues from the above procedures and excess butyllithium should be placed in an appropriate
container, clearly labeled, and handled according to your institution's waste disposal guidelines. |
|
|