| Identification | More | [Name]
4-Methyl-2-pentanone | [CAS]
108-10-1 | [Synonyms]
4-METHYL-2-PENTANONE
4-METHYLPENTAN-2-ONE
FEMA 2731
HEXONE
ISOBUTYL METHYL KETONE
ISOPROPYLACETONE
METHYL ISOBUTYL KETONE
MIBK
2-Methyl-4-pentanal
2-Methyl-4-Pentanone
2-Methylpropyl methyl ketone
2-methylpropylmethylketone
2-Pentanone, 4-methyl-
2-Pentanone,4-methyl-
2-pentanone,-methyl-
4-Keto-2-methylpentane
4-Methyl-2-oxopentane
4-Methyl-2-pentanon
4-methyl-2-pentanon(czech)
4-methyl-2-pentanone (MIBK | [EINECS(EC#)]
203-550-1 | [Molecular Formula]
C6H12O | [MDL Number]
MFCD00008938 | [Molecular Weight]
100.16 | [MOL File]
108-10-1.mol |
| Chemical Properties | Back Directory | [Appearance]
MIBK is a colorless liquid with a pleasant,
sweet, fruity odor. | [Melting point ]
-80 °C (lit.) | [Boiling point ]
117-118 °C | [density ]
0.801 g/mL at 25 °C(lit.)
| [vapor density ]
3.5 (vs air)
| [vapor pressure ]
15 mm Hg ( 20 °C)
| [FEMA ]
2731 | [refractive index ]
n20/D 1.395(lit.)
| [Fp ]
56 °F
| [storage temp. ]
2-8°C | [solubility ]
water: soluble20g/L | [form ]
Liquid | [color ]
APHA: ≤15 | [Specific Gravity]
0.80 | [Odor]
Pleasant; mild, characteristic; sharp; non-residual; ketonic. | [explosive limit]
1.2-8%, 93°F | [Odor Threshold]
0.17ppm | [Odor Type]
green | [Water Solubility ]
17 g/L (20 ºC) | [λmax]
λ: 335 nm Amax: 1.00
λ: 340 nm Amax: 0.50
λ: 360 nm Amax: 0.15
λ: 380 nm Amax: 0.02
λ: 400 nm Amax: 0.01 | [JECFA Number]
301 | [Merck ]
14,5207 | [BRN ]
605399 | [Henry's Law Constant]
2.56 at 25 °C (batch stripping method-GC, Kim et al., 2000) | [Dielectric constant]
13.0（Ambient） | [Exposure limits]
TLV-TWA 205 mg/m3 (50 ppm); STEL 300
mg/m3 (75 ppm) (ACGIH); IDLH 3000 ppm
(NIOSH). | [Stability:]
Volatile | [LogP]
1.3-1.9 at 20℃ | [CAS DataBase Reference]
108-10-1(CAS DataBase Reference) | [IARC]
2B (Vol. 101) 2013 | [NIST Chemistry Reference]
Methyl isobutyl ketone(108-10-1) | [EPA Substance Registry System]
108-10-1(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
F,Xn,T | [Risk Statements ]
R11:Highly Flammable.
R20:Harmful by inhalation.
R36/37:Irritating to eyes and respiratory system .
R66:Repeated exposure may cause skin dryness or cracking.
R39/23/24/25:Toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed .
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed . | [Safety Statements ]
S9:Keep container in a well-ventilated place .
S16:Keep away from sources of ignition-No smoking .
S29:Do not empty into drains .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S36/37:Wear suitable protective clothing and gloves .
S7:Keep container tightly closed . | [OEB]
A | [OEL]
TWA: 50 ppm (205 mg/m3), STEL: 75 ppm (300 mg/m3) | [RIDADR ]
UN 1245 3/PG 2 | [WGK Germany ]
1 | [RTECS ]
SA9275000 | [Autoignition Temperature]
840 °F | [TSCA ]
Yes | [HazardClass ]
3 | [PackingGroup ]
II | [HS Code ]
2914 13 00 | [Hazardous Substances Data]
108-10-1(Hazardous Substances Data) | [Toxicity]
LD50 orally in rats: 2.08 g/kg (Smyth) | [IDLA]
500 ppm |
| Hazard Information | Back Directory | [General Description]
A clear colorless liquid with a pleasant odor. Flash point 73°F. Less dense than water. Vapors heavier than air. | [Reactivity Profile]
METHYL ISOBUTYL KETONE(108-10-1) is incompatible with caustic soda and other strong alkalis, hydrochloric acid, sulfuric acid and other strong inorganic acids, amines and oxidizing agents such as hydrogen peroxide, nitric acid, perchloric acid and chromium trioxide. METHYL ISOBUTYL KETONE(108-10-1) reacts violently with potassium tert-butoxide. METHYL ISOBUTYL KETONE(108-10-1) reacts vigorously with reducing materials. . | [Air & Water Reactions]
Highly flammable. This chemical is sensitive to air (may form explosive peroxides). Slightly soluble in water. | [Hazard]
Flammable, dangerous fire risk, explosivelimits in air 1.4–7.5%. Avoid ingestion and inhala-tion. Upper respiratory tract irritant, dizziness, andheadache. Possible carcinogen. | [Health Hazard]
Vapor causes irritation of eyes and nose; high concentrations cause anesthesia and depression. Liquid dries out skin and may cause dermatitis; irritates eyes but does not injure them. | [Potential Exposure]
MIBK is used as a solvent; a denaturant; and as an extractant; in the manufacture of methyl
amyl alcohol; as a solvent in paints, varnishes, and lacquers; as an alcohol denaturant; as a solvent in uranium
extraction from fission products. | [First aid]
If this chemical gets into the eyes, remove any
contact lenses at once and irrigate immediately for at least
15 minutes, occasionally lifting upper and lower lids. Seek
medical attention immediately. If this chemical contacts the
skin, remove contaminated clothing and wash immediately
with soap and water. Seek medical attention immediately.
If this chemical has been inhaled, remove from exposure,
begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if
heart action has stopped. Transfer promptly to a medical
facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce
vomiting. Do not make an unconscious person vomit | [Shipping]
UN1245 Methyl isobutyl ketone, Hazard Class: 3;
Labels: 3-Flammable liquid. | [Incompatibilities]
Able to form unstable and explosive peroxides on contact with air. Reacts violently with strong oxidizers, potassium tert-butoxide; strong acids; aliphatic
amines; reducing agents | [Description]
4-Methyl-2-pentanone has a pleasant odor. May be prepared by
hydrogenation of mesityl oxide over Ni at 160 - 190°C; also by
oxidation of methyl isobutyl carbinol. | [Chemical Properties]
4-Methyl-2-pentanone has a fruity, ethereal, spicy (on dilution) odor. | [Chemical Properties]
Methyl isobutyl ketone (MIBK) is a colorless liquid with a pleasant, sweet, fruity odor. The odor threshold can be as low as 0.10 ppm. It is 2% soluble in water by weight and with several other organic solvents. The lower explosive limit is 1.2% and the upper explosive limit is 8.0% at 200 °F. Methyl isobutyl ketone may be incompatible with strong oxidizers and potassium tert-butoxide. | [Waste Disposal]
Consult with environmental
regulatory agencies for guidance on acceptable disposal
practices. Generators of waste containing this contaminant
(≥100 kg/mo) must conform to EPA regulations governing
storage, transportation, treatment, and waste disposal.
Incineration. | [Physical properties]
Clear, colorless, watery liquid with a mild, pleasant odor. Odor threshold concentration is 47 ppbv
(Leonardos et al., 1969). Experimentally determined detection and recognition odor threshold
concentrations were 400 μg/m3 (100 ppbv) and 1.1 mg/m3 (270 ppbv), respectively (Hellman and
Small, 1974). | [Occurrence]
Reported found in orange and lemon juice, grape; vinegar, baked potato, papaya, ginger, wheat bread, cheeses,
milk, cooked egg, roast chicken, cooked beef, lamb fat, pork liver, hop oil, beer, cognac, coffee, tea, plumcot, plum brandy, mushroom, trassi, sesame seed, buckwheat, wort, elder flower, Bourbon vanilla, clary and red sage, crab, clam and Chinese quince. | [Uses]
In paints, glues, and cleaning agents;
used in the plastic and petrol industries | [Uses]
Methyl isobutyl ketone (hexone, isobutyl methyl ketone, 4-methyl-2-pentanone) is an organic solvent similar in structure and use to methyl butyl ketone. In addition to its use as a solvent for paints, lacquers, and varnishes, methyl isobutyl ketone is used in extraction processes and as a denaturant for rubbing alcohol. Methyl isobutyl ketone is also used as a synthetic flavoring in some varieties of rum, candy, and cheese. Unlike methyl butyl ketone, methyl isobutyl ketone has not been found to occur naturally. | [Uses]
MIBK is used as a solvent for gums, resins,nitrocellulose and cellulose ethers, and various fats, oils, and waxes. | [Definition]
ChEBI: Methyl isobutyl ketone is a ketone. | [Preparation]
By hydrogenation of mesityl oxide over Ni at 160 to 190°C; also by oxidation of methyl isobutyl carbinol. | [Production Methods]
Methyl isobutyl ketone can be manufactured by two processes
. The first is a mixed ketone process where MiBK,
diisobutyl ketone, and acetone are coproduced in a single
reaction using isopropanol as a starting material. The second
method is used to produce the majority of MiBK and involves
a three-step reaction sequence in which diacetone alcohol
and mesityl oxide are formed as intermediates. | [Aroma threshold values]
Detection: 240 to 640 ppb | [Taste threshold values]
Taste characteristics at 25 ppm: sweet, ethereal, banana and fruity with dairy nuances | [Synthesis Reference(s)]
Journal of the American Chemical Society, 100, p. 5437, 1978 DOI: 10.1021/ja00485a031
Tetrahedron Letters, 36, p. 2285, 1995 DOI: 10.1016/0040-4039(95)00191-E
Tetrahedron, 37, p. 3073, 1981 DOI: 10.1016/S0040-4020(01)98839-8 | [Flammability and Explosibility]
Highlyflammable | [Chemical Reactivity]
Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent. | [Carcinogenicity]
The National Toxicology Program
conducted cancer bioassays by exposing groups of
50 male and 50 female F344 rats and B6C3F1 mice to
MiBK vapor at 0, 450, 900, or 1800 ppm 6h/day, 5 days/
week for 2 years. Survival and body weight gain
were decreased in male rats at 1800 ppm. Body weight
gain was also decreased in male rats at 900 and in female
mice at 1800ppm. A higher incidence of mineralization of
the renal papilla was observed in male rats at all MiBK
exposure levels. Chronic progressive nephropathy (CPN) and
the incidences of adenoma and adenoma or carcinoma
(combined) were increased for the male 1800 ppm exposure
group. The severity of CPN and renal tubular hyperplasia was
increased in all male rat exposure groups. An uncertain
increase in mononuclear cell leukemia, adrenal medulla
hyperplasia, and a positive trend for increases in benign or
malignant pheochromocytomas (combined) were reported
for the 1800 ppm male group. The NTP considered that there
was some evidence of carcinogenic activity in male rats
based on increased incidences of renal tubule neoplasms.
None of the rodent bioassay results were considered clear
evidence of carcinogenicity by NTP. | [Environmental Fate]
Biological. Bridié et al. (1979) reported BOD and COD values of 2.06 and 2.16 g/g using
filtered effluent from a biological sanitary waste treatment plant. These values were determined
using a standard dilution method at 20 °C and stirred for a period of 5 d. Heukelekian and Rand
(1955) reported a 5-d BOD value of 1.51 g/g which is 55.5% of the ThOD value of 2.72 g/g.
Photolytic. When synthetic air containing gaseous nitrous acid and 4-methyl-2-pentanone was
exposed to artificial sunlight (λ = 300–450 nm), photooxidation products identified were acetone,
peroxyacetal nitrate, and methyl nitrate (Cox et al., 1980). In a subsequent experiment, the OHinitiated
photooxidation of 4-methyl-2-pentanone in a smog chamber produced acetone (90%
yield) and peroxyacetal nitrate (Cox et al., 1981). Irradiation at 3130 ? resulted in the formation of
acetone, propyldiene, and free radicals (Calvert and Pitts, 1966).
Second-order photooxidation rate constants for the reaction of 4-methyl-2-butanone and OH
radicals in the atmosphere are 1.4 x 10-10, 1.42 x 10-10, and 1.32 x 10-10 cm3/molecule?sec at 295,
299, and 300 K, respectively (Atkinson, 1985). The atmospheric lifetime was estimated to be 1–5
d (Kelly et al., 1994).
Photolytic. Cox et al. (1980) reported a rate constant of 1.24 x 10-11 cm3/molecule?sec for the
reaction of gaseous 4-methyl-2-pentanone with OH radicals based on a value of 8 x 10-12
cm3/molecule?sec for the reaction of ethylene with OH radicals.
Chemical/Physical. 4-Methyl-2-pentanone will not hydrolyze in water because it does not
contain a hydrolyzable functional group (Kollig, 1993). | [storage]
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with this chemical you should be trainedon its proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Methylisobutyl ketone must be stored to avoid contact with strongoxidizers because violent reactions occur. Store in tightlyclosed containers in a cool, well-ventilated area away fromheat, sparks, and flames. Sources of ignition, such as smoking and open flames, are prohibited where methyl isobutylketone is used, handled, or stored in a manner that couldcrate a potential fire or explosion hazard. Metal containersinvolving the transfer of 5 gallons or more of methyl isobutyl ketone should be grounded and bonded. Drums must beequipped with self-closing valves, pressure vacuum bungs,and flame arresters. Use only nonsparking tools and equipment, especially when opening and closing containers ofmethyl isobutyl ketone. | [Purification Methods]
Reflux the ketone with a little KMnO4, wash it with aqueous NaHCO3, dry with CaSO4 and distil it. Acidic impurities are removed by passage through a small column of activated alumina. [Beilstein 1 IV 3305.] |
|
|