Diosmin synthesis
- Product Name:Diosmin
- CAS Number:520-27-4
- Molecular formula:C28H32O15
- Molecular Weight:608.54
520-26-3
625 suppliers
$5.00/250mg
520-27-4
558 suppliers
$5.00/50mg
Yield:520-27-4 85.7%
Reaction Conditions:
with morpholine;iodine at 40 - 70;Large scale;Green chemistry;Temperature;Reagent/catalyst;
Steps:
8 Example 8
In 20L reaction kettle, add hesperidin 2 kg, iodine 0.92 kg, then add morpholine 12L. Start stirring and elevating temperature. When the temperature rises to 40 deg.C, sample is completely dissolved, At 45 deg.C ± 5 deg.C maintain temperature for 0.5 hours.Then, increase the temperature to 70 deg.C ± 5 deg.C and maintain the temperature and stir for 1.5-3 hours (HPLC monitoring hesperdin completely after transformation as the end point of the reaction). Recovery solvent to reactant into a viscous, adding 12L purified water, stirring, the material after being homogenized, the hydraulic the reaction buffer tank, adding hydrochloric acid adjusting pH=5-7 to crystallization, filtration, filter cake and filtrate, the filtrate pH=2 adjusted by adding hydrochloric acid, slowly adding 30% hydrogen peroxide 0.41 kg, filter, recovery elemental iodine. The filter cake is washed with a large amount of water washing, diosmin mode crude product obtained. Dissolving the purified water is added to the purification tank 12L and 0.39 kg sodium hydroxide, stir until completely dissolved after diosmin mode crude product into the continue to stir until completely dissolved, slowly adding at 20L acetonitrile, the solid is separated out, filtering, takes filters cake (diosmin mode sodium salt purity is of 99.27%), again dissolving the purified water is added to the purification tank 30L, then add and stir the filter cake to be completely dissolved, slowly dilute hydrochloric acid in this case adjusting pH=5-7, a large number of solid precipitation, filtration, the filter cake is washed with a large amount of purified water washing 1 hours, collecting filter cake, is put into the 80 °C ± 5 °C blast drying, crushing, diosmin mode the finished product to 1.69 kg, the purity is 99.44%, the yield is 85.7%, to the solvent recovery rate 80.1%, iodine recovery rate 89.6%, residual solvent, -related impurities are standard.
References:
CN105732744,2016,A Location in patent:Paragraph 0040; 0041
64726-90-5
4 suppliers
inquiry
520-27-4
558 suppliers
$5.00/50mg
69081-76-1
0 suppliers
inquiry
520-27-4
558 suppliers
$5.00/50mg