no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
no data available
Cardiovascular monitoring should begin immediately and should include continuous ECG monitoring to detect possible arrhythmias. Treatment may include correction of electrolyte abnormalities and acid-base balance, lidocaine, phenytoin, isoproterenol, ventricular pacing, and defibrillation. Antiarrhythmic agents that can prolong the QT interval (eg, class IA [disopyramide, procainamide, quinidine] or III agents) should be avoided in treating overdosage-associated arrhythmias in which prolongation of QTc is a manifestation. Appropriate therapy (IV fluids and a vasopressor) should be instituted if hypotension occurs; epinephrine, bretylium, or dopamine should not be used. For the management of refractory hypotension, vasopressors such as phenylephrine, levarterenol, or metaraminol may be used. Appropriate therapy should be instituted if excessive sedation occurs; CNS stimulants that may cause seizures should be avoided. If seizures occur, treatment should not include barbiturates because these drugs may potentiate phenothiazine-induced respiratory depression. Hypothermia is common and sometimes difficult to control. In some patients with acute toxicity, exchange transfusions may be useful, but hemodialysis, forced diuresis, hemoperfusion, or manipulation of urine pH is of little value in enhancing elimination of phenothiazines. Phenothiazine General Statement
Water spray, dry chemical, carbon dioxide or foam as appropriate for surrounding fire and materials.
no data available
Wear self-contained breathing apparatus for firefighting if necessary.
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Wear approved respiratory protection, chemically compatible gloves and protective clothing. Wipe up spillage or collect spillage using a high efficiency vacuum cleaner. Avoid breathing dust. Place spillage in appropriately labeled container for disposal. Wash spill site.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Commercially available preparations of prochlorperazine should be stored in tight, light-resistant containers. Prochlorperazine edisylate oral solutions and injection, and prochlorperazine maleate tablets and extended-release capsules should be stored at a temperature less than 40 deg C, preferably between 15 -30 deg C; freezing of the oral solutions and injection should be avoided. Prochlorperazine suppositories should be stored at a temperature less than 37 deg C. Prochlorperazine edisylate injection should be protected from light, which can cause discoloration; if discoloration occurs, the injection should be discarded.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
no data available
228°C
524.8°C at 760mmHg
no data available
no data available
271.2°C
no data available
no data available
no data available
no data available
no data available
1.18X10-9 mm Hg at 25 deg C (est)
1.217g/cm3
no data available
no data available
no data available
Sensitive to light.
no data available
no data available
Prochlorperazine edisylate injection is physically and/or chemically incompatible with some drugs, but the compatibility depends on several factors (eg, concentrations of the drugs, specific diluents used, resulting pH, temperature). Specialized references should be consulted for specific compatibility information.
When heated to decomposition it emits very toxic fumes of sulfoxides, nitroxides, and /hydrogen chloride/.
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3261 (For reference only, please check.)
IMDG: UN3261 (For reference only, please check.)
IATA: UN3261 (For reference only, please check.)
ADR/RID: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IMDG: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IATA: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
ADR/RID: 8 (For reference only, please check.)
IMDG: 8 (For reference only, please check.)
IATA: 8 (For reference only, please check.)
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.