DIISOPROPYLBENZENE
Product identifier
- Product name: DIISOPROPYLBENZENE
- CBnumber: CB7757026
- CAS: 25321-09-9
- EINECS Number: 246-835-6
- Synonyms: diisopropylbenzene,1,2-Bis(1-Methylethyl)Benzene
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
- Uses advised against: none
Company Identification
- Company: Chemicalbook
- Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
- Telephone: 400-158-6606
Classification of the substance or mixture
Aspiration hazard, Category 1
Label elements
Pictogram(s)
- Signal wordWarning
H227 Combustible liquid
H315 Causes skin irritation
H320 Causes eye irritation
H373 May cause damage to organs through prolonged or repeated exposure
H410 Very toxic to aquatic life with long lasting effects
P210 Keep away from heat/sparks/open flames/hot surfaces. — No smoking.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P264 Wash skin thouroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P314 Get medical advice/attention if you feel unwell.
P391 Collect spillage. Hazardous to the aquatic environment
P370+P378 In case of fire: Use … for extinction.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container to..…
none
P301+P316 IF SWALLOWED: Get emergency medical help immediately.
P331 Do NOT induce vomiting.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards
no data available
Substance
- Product name: DIISOPROPYLBENZENE
- Synonyms: diisopropylbenzene,1,2-Bis(1-Methylethyl)Benzene
- CAS: 25321-09-9
- EC number: 246-835-6
- MF: C12H18
- MW: 162.27
Description of first aid measures
If inhaledFresh air, rest.
Rinse and then wash skin with water and soap.
Rinse with plenty of water (remove contact lenses if easily possible).
Rinse mouth. Rest.
Most important symptoms and effects, both acute and delayed
Vapors and liquid are irritating to eyes, mucous membrane, and upper respiratory tract and can cause headache, narcosis and unconsciousness. Systemic effects can have a relatively long duration after exposure. Ingestion can be moderately to severely toxic. Liquid can cause defatting of skin and dermititis. (USCG, 1999)
Indication of any immediate medical attention and special treatment needed
no data available
Extinguishing media
Foam, carbon dioxide, dry chemical, water spray or mist.
Specific Hazards Arising from the Chemical
Special Hazards of Combustion Products: Vapors may travel considerable distance to an ignition source and flash back. (USCG, 1999)
Advice for firefighters
Use powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
NFPA 704
| HEALTH | 0 | Poses no health hazard, no precautions necessary and would offer no hazard beyond that of ordinary combustible materials | |
| FIRE | 2 | Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur and multiple finely divided suspended solids that do not require heating before ignition can occur. Flash point between 37.8 and 93.3 °C (100 and 200 °F). (e.g. diesel fuel, sulfur) | |
| REACT | 0 | Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2) | |
| SPEC. HAZ. |
Personal precautions, protective equipment and emergency procedures
Remove all ignition sources. Do NOT let this chemical enter the environment. Ventilation. Collect leaking liquid in covered containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Environmental precautions
Remove all ignition sources. Do NOT let this chemical enter the environment. Ventilation. Collect leaking liquid in covered containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Methods and materials for containment and cleaning up
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
Precautions for safe handling
NO open flames. Above 77°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Provision to contain effluent from fire extinguishing. Keep in a well-ventilated room. Store in an area without drain or sewer access.
Control parameters
Occupational Exposure limit valuesno data available
no data available
Exposure controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures
Eye/face protectionWear safety spectacles.
Protective gloves.
Use ventilation.
no data available
Information on basic physicochemical properties
- Physical state
Diisopropylbenzene (all isomers) is a clear amber liquid with a sharp, penetrating odor. A mixture of three isomers (ortho, meta, and para).
- Colour
Clear, colorless liquid
- Odour
no data available
- Melting point/freezing point
155°C(lit.)
- Boiling point or initial boiling point and boiling range
150°C(lit.)
- Flammability
Combustible.
- Lower and upper explosion limit/flammability limit
no data available
- Flash point
77°C(lit.)
- Auto-ignition temperature
840° F (USCG, 1999)
- Decomposition temperature
no data available
- pH
no data available
- Kinematic viscosity
no data available
- Solubility
Sol in all proportions of alcohol, ether, acetone and benzene.
- Partition coefficient n-octanol/water
5.2
- Vapour pressure
0.278mmHg at 25°C
- Density and/or relative density
0.85
- Relative vapour density
(air = 1): 5.6
- Particle characteristics
no data available
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
Moderate, when exposed to heat or flame.Vigorous reactions, sometimes amounting to explosions, can result from the contact between aromatic hydrocarbons, such as DIISOPROPYLBENZENE (ALL ISOMERS), and strong oxidizing agents. Can react exothermically with bases and with diazo compounds. Substitution at the benzene nucleus occurs by halogenation (acid catalyst), nitration, sulfonation, and the Friedel-Crafts reaction.
Conditions to avoid
no data available
Incompatible materials
Can react with oxidizing materials.
Hazardous decomposition products
When heated to decomposition it emits acrid smoke and irritating fumes.
Acute toxicity
- Oral: no data available
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
Exposure at high levels could cause lowering of consciousness.
STOT-repeated exposure
no data available
Aspiration hazard
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached.
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Other adverse effects
no data available
Disposal methods
ProductThe material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
UN Number
ADR/RID: UN3082 (For reference only, please check.)
IMDG: UN3082 (For reference only, please check.)
IATA: UN3082 (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (For reference only, please check.)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (For reference only, please check.)
IATA: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (For reference only, please check.)
Transport hazard class(es)
ADR/RID: 9 (For reference only, please check.)
IMDG: 9 (For reference only, please check.)
IATA: 9 (For reference only, please check.)
Packing group, if applicable
ADR/RID: III (For reference only, please check.)
IMDG: III (For reference only, please check.)
IATA: III (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
Safety, health and environmental regulations specific for the product in question
European Inventory of Existing Commercial Chemical Substances (EINECS)Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
This card is based on a mixture of m-diisopropylbenzene (CAS # 99-62-7) and p-diisopropylbenzene (CAS # 100-18-5).
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.