Phenol suppliers
Phenol
- CAS:
- 108-95-2
- MF:
- C6H6O
- MW:
- 94.11
Suppliers by country/region
Company Type
Properties
- Melting point:
- 40-42 °C(lit.)
- Boiling point:
- 182 °C(lit.)
- Density
- 1.071 g/mL at 25 °C(lit.)
- bulk density
- 620kg/m3
- vapor density
- 3.24 (vs air)
- vapor pressure
- 0.09 psi ( 55 °C)
- FEMA
- 3223 | PHENOL
- refractive index
- n
20/D 1.53
- Flash point:
- 175 °F
- storage temp.
- 2-8°C
- solubility
- H2O: 50 mg/mL at 20 °C, clear, colorless
- form
- liquid
- pka
- 9.89(at 20℃)
- Specific Gravity
- 1.071
- color
- faintly yellow
- PH
- 6.47(1 mM solution);5.99(10 mM solution);5.49(100 mM solution);
- Odor
- Sweet, medicinal odor detectable at 0.06 ppm
- Odor Threshold
- 0.0056ppm
- explosive limit
- 1.3-9.5%(V)
- biological source
- synthetic
- Odor Type
- phenolic
- Water Solubility
- 8 g/100 mL
- FreezingPoint
- 41℃
- Sensitive
- Air & Light Sensitive
- Merck
- 14,7241
- JECFA Number
- 690
- BRN
- 969616
- Henry's Law Constant
- 1.09 at 5 °C (average derived from six field experiments, Lüttke and Levsen, 1997)
- Exposure limits
- TLV-TWA skin 5 ppm (~19 mg/m3 ) (ACGIH, MSHA, and OSHA); 10-hour TWA 5.2 ppm (~20 mg/m3 ) (NIOSH); ceiling 60 mg (15 minutes) (NIOSH); IDLH 250 ppm (NIOSH).
- Dielectric constant
- 4.3(10℃)
- Stability:
- Hygroscopic
- InChIKey
- ISWSIDIOOBJBQZ-UHFFFAOYSA-N
- LogP
- 1.47 at 30℃
- CAS DataBase Reference
- 108-95-2(CAS DataBase Reference)
- IARC
- 3 (Vol. 47, 71) 1999
- NIST Chemistry Reference
- Phenol(108-95-2)
- EPA Substance Registry System
- Phenol (108-95-2)
- Absorption
- cut-off at 294nm in H2O at 0.5M
Safety Information
- Symbol(GHS)
GHS05,GHS06,GHS08,GHS09
- Signal word
- Danger
- Hazard statements
- H301+H311+H331-H314-H341-H373-H411
- Precautionary statements
- P260-P273-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338
- Hazard Codes
- T,C,F,Xn
- Risk Statements
- 23/24/25-34-48/20/21/22-68-40-39/23/24/25-11-36-20/21/22-24/25
- Safety Statements
- 26-36/37/39-45-36/37-28A-28-24/25-1/2-36-16-7
- RIDADR
- UN 2821 6.1/PG 2
- OEB
- A
- OEL
- TWA: 5 ppm (19 mg/m3), Ceiling: 15.6 ppm (60 mg/m3) [15-minute] [skin]
- WGK Germany
- 2
- RTECS
- SJ3325000
- F
- 8-23
- Autoignition Temperature
- 715 °C
- TSCA
- Yes
- HazardClass
- 6.1
- PackingGroup
- II
- HS Code
- 29071100
- Hazardous Substances Data
- 108-95-2(Hazardous Substances Data)
- Toxicity
- LD50 orally in rats: 530 mg/kg (Deichmann, Witherup)
- IDLA
- 250 ppm
Use
The predominant use of phenol today is for phenolic resins.it is a powerful bactericide,phenol can be found in numerous consumer products includingmouthwashes,antiseptic ointments,throat lozenges,air fresheners,eardrops,and lipbalms.Phenol continues to be a primary chemical used to make thermoset resins.These resinsare made by combining phenol with aldehydes such as formaldehyde.More than 4 billionpounds of phenolic resins are used annually in the United States.Phenolic resins findtheir widest use in the construction industry.They are used as binding agents and fillers inwood products such as plywood,particleboard,furniture, and paneling.Phenolic resins areimpregnated into paper,which,after hardening,produces sheets that can be glued togetherto form laminates for use in wall paneling and countertops.Decking in boats and docksare made from phenolic resin composites.Phenolic resins are used as sealing agents andfor insulation. Because phenolic resins have high heat resistance and are good insulators,they are used in cookware handles.Because they are also good electrical insulators,they areused in electrical switches,wall plates, and for various other electrical applications.In theautomotive industry,phenolic resins are used for parts such as drive pulleys,water pumphousings, brakes,and body parts.In addition to the construction industry,phenol has many other applications.It isused in pharmaceuticals,in herbicides and pesticides,and as a germicide in paints.It can beused to produce caprolactam,which is the monomer used in the production of nylon 6.Another important industrial compound produced from phenol is bisphenol A,which ismade from phenol and acetone.Bisphenol A is used in the manufacture of polycarbonateresins.Polycarbonate resins are manufactured into structural parts used in the manufactureof various products such as automobile parts,electrical products,and consumer appliances.Items such as compact discs, reading glasses,sunglasses,and water bottles are made frompolycarbonates.
646 supplier list of "Phenol"
- Product Name:White Crystal Phenol
- Products Intro:Purity: 99%|Package: ≥20T;$1040.00/T|≥40T;$1020.00/T|≥50T;$1010.00/T
- Company Type: Trader
- Country/Region: CHINA
- Main Products: Lithium hydroxide,lithium carbonate,bronze powder,lithium chloride,lead powder
$100.00/ 25kg
- Product Name:Phenol
- Products Intro:Purity: 99%min|Package: 25kg;100.00;USD
- Company Type: Trader
- Country/Region: CHINA
- Main Products: 1-Octadecanol,AMP 95,Polyisobutylene,tetramisole hcl,Ivermectin
$19.00/ 1KG
- Product Name:Phenol
- Products Intro:Purity: 99.%|Package: 1KG;19.00;USD
- Company Type: Trader
- Country/Region: CHINA
- Main Products: acetic acid,Ethyl oleate,Hypophosphorous acid,tetramisole,OPP