| Identification | Back Directory | [Name]
Talc | [CAS]
14807-96-6 | [Synonyms]
TALC
IT X
IT 3X
IT 5X
IT FT
15MOO
5000A
5000S
850JS
A 10XC
5000SA
5000PJ
20MOOS
3000N1
IT 325
A 27678
10MO-OS
TALC,FCC
NYTAL 200
NYTAL 300
NYTAL 400
NYTAL 300H
talcpowder
A 1 (talc)
A 10 (talc)
PULVISTALCI
NYTAL 100 HR
NYTAL(R) 100
COSMETICTALC
TALC, PH EUR
TALCUM POWDER
TALC, 325 MESH
Talc (Talcum)
Talc total dust
TALC-350 MESH
TALC,POWDER,USP
TREMOLITIC TALC
CERAMITALC NO 1
Mistron Monomix G
Talc powder, 10 mum
Talc fibrous (f/ml)
talc(silicaandfibre
NON-ASBESTIFORMTALC
Talg (Mg3H2(SiO3)4)
Talc (Mg3H2(SiO3)4)
Talc respirable dust
Talc Mistron Monomix
Talc powder,superfine
talc(noneasbestiform)
TalcFinePowderExtraPure
TALC POWDER <10 MICRON
talc(silicaandfibrefree)
talc(containingnoasbestos
powdered,pure,Ph.Eur.,USP
TALC (MAGNESIUM SILICATE )
Talc Vetec(TM) reagent grade
Pigment white 26 (C.I. 77718)
HAICHEN TALC POWDER NO1 AND NO2
talc(containingnoasbestosandlessth
TALC(NOTCONTAININGASBESTIFORMFIBRES)
Hydrous magnesium silicate, Talcum
Magnesium silicate monohydrate (Talc)
Talc, particle size:-200 mesh (<75 μm)
Talc, particle size:-200 Mesh (<75 áM)
Trimagnesium tetrasilicon undecaoxide hydrate
TALC POWDER, DAB, PH. EUR., B. P., PH. F RANC.
TALC EXTRA FINE POWDER EXTRA PURE PH EUR BP USP | [EINECS(EC#)]
238-877-9 | [Molecular Formula]
3MgO.4O2Si.H2O | [MDL Number]
MFCD00676189 | [MOL File]
14807-96-6.mol | [Molecular Weight]
379.263 |
| Chemical Properties | Back Directory | [Appearance]
White to almost white micro fine powder, greasy to | [Melting point ]
800 °C | [density ]
2.7-2.8 | [vapor pressure ]
0Pa at 25℃ | [storage temp. ]
Sealed in dry,Room Temperature | [solubility ]
Practically insoluble in water, in ethanol (96 per cent) and in dilute solutions of acids and alkali hydroxides. | [form ]
Powder/Solid | [color ]
White to pale gray | [Odor]
at 100.00?%. odorless | [Water Solubility ]
Insoluble in water, cold acids, alkalies. | [Merck ]
14,9037 | [Exposure limits]
ACGIH: TWA 2 mg/m3
NIOSH: IDLH 1000 mg/m3; TWA 2 mg/m3 | [InChIKey]
FPAFDBFIGPHWGO-UHFFFAOYSA-N | [LogP]
-9.4 at 25℃ | [Uses]
talc adds softness and sliding ability to a cosmetic formulation. It is also used as a bulking and opacifying agent, and as an absorbent in makeup preparations. Talc is an inert powder, generally made from finely ground magnesium silicate, a mineral. | [IARC]
(Vol. 42, Sup 7) 1987, 3 (Vol. 42, Sup 7, 93) 2010, 2B (Vol. 93) 2010 | [EPA Substance Registry System]
Talc (14807-96-6) |
| Hazard Information | Back Directory | [Chemical Properties]
White to almost white micro fine powder, greasy to | [Usage]
Talc is a mineral composed of hydrated magnesium silicate with the chemical formula H2Mg3(SiO3)4 or Mg3Si4O10(OH)2. Talc is used in many industries such as paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics | [General Description]
Odorless white to grayish-white very fine crystalline powder (unctuous). Readily adheres to the skin. Nonflammable, noncombustible, and nontoxic. | [Air & Water Reactions]
Insoluble in water. | [Reactivity Profile]
Talc has low reactivity. | [Fire Hazard]
Literature sources indicate that Talc is nonflammable. | [Description]
Soapstone is composed primarily of talc, and has been used for
most of recorded history as a carving medium; examples
thousands of years old are still extant from Egyptian, Assyrian,
and Chinese cultures. The term ‘talc’ was first used in AD 869 to
describe minerals that were largely composed of what we now
know as talc. | [Occurrence]
Talc is formed under hydrothermal conditions and is a typical mineral of weaker regional metamorphism (regional dynamo-thermometamorphism). It often occurs in association with chlorite, serpentine, or magnesite. The main parent rocks that undergo metamorphic mineral reactions leading to talc formation are either ( magnesite-bearing) siliceous dolomites, or olivine- and/or pyroxene- containing ultrabasics. In ultrabasic rocks, talc is often a product of hydrothermal alteration (autometasomatism). In commercially important deposits, talc occurs in association with tremolite, calcite, quartz, and dolomite, as the product of a more intense regional metamorphism of siliceous dolomites, and with forsterite and anthophyllite due to intense regional metamorphic overprint of ultrabasics. However, talc can also be observed as an authigenic new formation, e.g., in sandy sediments and salt deposits. Other minerals that occur in association with talc include chlorites, mica, actinolite, feldspars, rutile, pyrrhotite, pyrite, magnetite, and hematite. Limonite, a product of the weathering of iron- containing minerals, especially iron- containing ore minerals, can often be found interspersed with talc. | [History]
Talc, soapstone, and steatite have been used by humans as raw materials since prehistoric times. Molds carved from soapstone were used in the Bronze Age and early Iron Age for casting weapons and tools. In the Mediterranean cultures of the classical period, stone carvings were made from soapstone, and talc was used for treating wounds and in the production of cosmetic powder. In ancient Rome, women used large amounts of powder and rouge. The properties of talc, especially its characteristic greasy feel, were described by Pliny the Elder. The old Arabic word talq, which indicates its greasy nature, gave its name to the mineral. In 1550, Catherin de Medici made it once again fashionable to use facial makeup in the form of powdered talc colored by the addition of pigments, a fashion that found innumerable imitators and has continued without interruption until today. | [Definition]
Talc, a hydrated magnesium sulfate, is the primary component of most face powders (eye shadows and blushers). In some products, talc makes up to 70% of the formulation. Cosmetic talc should be white, free of asbestos, should have high spreadability or slip, with low coverage. Particle size is acceptable if the material passes through a 200 mesh sieve. Micronized talc is generally lighter and fluffier but less smooth on the skin than regular grades. Typically talc products are sterilized using gamma irradiation. Cosmetic talcs are mined in Italy, France, Norway, India, Spain, China, Egypt, Japan, and the United States. Talc is fairly hydrophobic, although treatments are used to enhance its texture. | [Production Methods]
Talc is a naturally occurring hydropolysilicate mineral found in
many parts of the world including Australia, China, Italy, India,
France, and the USA.
The purity of talc varies depending on the country of origin. For
example, Italian types are reported to contain calcium silicate as the
contaminant; Indian types contain aluminum and iron oxides;
French types contain aluminum oxide; and American types contain
calcium carbonate (California), iron oxide (Montana), aluminum and iron oxides (North Carolina), or aluminum oxide (Alabama).
Naturally occurring talc is mined and pulverized before being
subjected to flotation processes to remove various impurities such as
asbestos (tremolite); carbon; dolomite; iron oxide; and various
other magnesium and carbonate minerals. Following this process,
the talc is finely powdered, treated with dilute hydrochloric acid,
washed with water, and then dried. The processing variables of
agglomerated talc strongly influence its physical characteristics. | [Health Hazard]
Pure talc is toxicologically harmless. However, where there are high concentrations of dust in the air, face masks should be worn. If the talc contains detectable amounts of asbestos or asbestos minerals, an MAK value of 2.0 mg/m3 applies. Talc is a nontoxic, inert substance or raw material, but it can contaminate wounds and if inhaled it can cause lung irritations. | [Flammability and Explosibility]
Notclassified | [Pharmaceutical Applications]
Talc was once widely used in oral solid dosage formulations as a
lubricant and diluent, although today it is less
commonly used. However, it is widely used as a dissolution
retardant in the development of controlled-release products. Talc is also used as a lubricant in tablet formulations; in a novel
powder coating for extended-release pellets; and as an adsorbant.
In topical preparations, talc is used as a dusting powder,
although it should not be used to dust surgical gloves. Talc is a natural material; it may therefore frequently contain
microorganisms and should be sterilized when used as a dusting
powder.
Talc is additionally used to clarify liquids and is also used in
cosmetics and food products, mainly for its lubricant properties. | [Safety]
Talc is used mainly in tablet and capsule formulations. Talc is not
absorbed systemically following oral ingestion and is therefore
regarded as an essentially nontoxic material. However, intranasal or
intravenous abuse of products containing talc can cause granulomas
in body tissues, particularly the lungs. Contamination of
wounds or body cavities with talc may also cause granulomas;
therefore, it should not be used to dust surgical gloves. Inhalation of
talc causes irritation and may cause severe respiratory distress in
infants.
Although talc has been extensively investigated for its carcinogenic
potential, and it has been suggested that there is an increased
risk of ovarian cancer in women using talc, the evidence is
inconclusive. However, talc contaminated with asbestos has
been proved to be carcinogenic in humans, and asbestos-free grades
should therefore be used in pharmaceutical products.
Also, long-term toxic effects of talc contaminated with large
quantities of hexachlorophene caused serious irreversible neurotoxicity
in infants accidentally exposed to the substance. | [Carcinogenicity]
In vitro assay of a number of respirable
talc specimens of high purity demonstrated
a modest but consistent cytotoxicity to
macrophages; the investigators conclude that
the talcs would be expected to be slightly fibrogenic
in vivo. | [storage]
Talc is a stable material and may be sterilized by heating at 160°C
for not less than 1 hour. It may also be sterilized by exposure to
ethylene oxide or gamma irradiation.
Talc should be stored in a well-closed container in a cool, dry
place. | [Toxicity evaluation]
The mechanism by which the talc is toxic is largely physical in
its function, impairing organ function by inhibiting necessary
movement or transfer of material. Pulmonary responses can
occur through production of microemboli and granuloma
formation. | [Incompatibilities]
Incompatible with quaternary ammonium compounds. | [Regulatory Status]
Accepted for use as a food additive in Europe. Included in the FDA
Inactive Ingredients Database (buccal tablets; oral capsules and
tablets; rectal and topical preparations). Included in nonparenteral
medicines licensed in the UK. Included in the Canadian List of
Acceptable Non-medicinal Ingredients. |
| Safety Data | Back Directory | [Hazard Codes ]
Xn | [Risk Statements ]
20-37 | [Safety Statements ]
36 | [WGK Germany ]
-
| [RTECS ]
WW2710000
| [TSCA ]
Yes | [HS Code ]
25262020 | [Safety Profile]
The talc with less than 1 percent asbestos is regarded as a nuisance dust. Talc with greater percentage of asbestos may be a human carcinogen. A human skin irritant. Prolonged or repeated exposure can produce a form of pulmonary fibrosis (talc pneumoconiosis) which may be due to asbestos content. Questionable carcinogen with experimental tumorigenic data. A common air contaminant. | [Hazardous Substances Data]
14807-96-6(Hazardous Substances Data) | [Toxicity]
A finely powdered hydrous
magnesium silicate. It is used in a variety of industrial processes
and products, including rubber, paints, lubricants, insulating materials, cosmetics, and toiletries, such as baby and dusting powders.
Acute inhalation of large quantities of talc, such as infants aspirating a massive amount of powder, has caused death within hours
because of drying of the mucous membranes, clogging of the
smaller airways, pulmonary edema and pneumonia. Chronic inhalation of talc, such as occurs in talc miners, leads to talcosis (a
pneumoconiosis) involving pulmonary fibrosis and pleural sclerosis. Lymph nodes can also be affected. There are suggestions that
talc can result in cervical or ovarian cancer although evidence for
this is not extensive. Some talc is contaminated with asbestos. | [IDLA]
1,000 mg/m3 |
|
|